The climate debate:
Paul Noel
OK lets clear up something. The earth routinely has natural climate change. It is even cyclic. We don’t know the reasons for it. It can be absolutely stated that CO2 is not a cause for this. In all cases the changes in CO2 levels happen 800 to 1000 or more years after any natural temperature changes.
The very existence of warming and cooling periods proves beyond all doubt that CO2 does not control the climate. If CO2 caused warming, once up, the CO2 would prevent cooling and you could never get an “Ice Age”. This is most often conveniently forgotten by our “Climate Change/Global Warming” lunatics.
Actually all of the radiological data, which is the source of the temperature proxy data, clearly defines the climate changes to be associated with Solar Activity. We now know that Solar Activity is regulated in a balance with Cosmic Ray Flux. This latter value is the product of the orbital variations within the Solar System and in it’s orbit around the Milky Way Galaxy.
Will the Earth be affected by “Climate Change?” If you define it as Anthropogenic Global Warming (AGW) you are out of luck. There is no data or evidence that suggests mankind has any effect of consequence here. Even the UN-IPCC is fast coming to that conclusion. If you define “Climate Change” as the cyclic variations of the climate it is always ongoing.
Let’s cover some simple facts. In the past 50 years there has been NO material change in Earth’s climate. We live in an age of “Global Boring”. Based upon historic and other data the probability of this condition continuing so stable for another 100 years is about zero. Certianly in another 1,000 years it is zero. The problem is forecasting which way it will go. The historic records show that we can see and expect periodically temperatures up to 10C above where we are at times. The Geologic and Ice Core data show we can expect temperatures up to -25C from the present level. Given this wide range of possiblities the forecasting becomes a bit uncertain.
The trendline suggest that we are going to go down sharply about -10C in the next 100 to 200 years. But the uncertainty could see up to 10C rise before that happens. Fourrier Transforms suggest that we have about topped out the cycle and are headed down. All I can say for sure is “Hide and Watch” but don’t for anything mistake any changes that happen for mankind causing them. The trendline for the past 6,000 years says welcome to the Ice Box! The variability of the trendline says you could get an excursion high too!
False narratives for climate change
Dr. Steven Greer It’s happening again and I got it on film… PREPARE NOW!
Interface with directed though and influences and quanta and field consciousness. Click for link with information here!
The need for convenient, economical and powerful sources of renewable energy remains urgent.
When the magnetic fields within a generator are caused to move and interact by means other than applied mechanical force, electric power can be supplied without the necessity of consuming limited natural resources, thus with far greater economy.
Free energy and T. E. Bearden, Ph.D
Magnetism
Summary of the Invention It has long been known that the source of the magnetism within a permanent magnet is a spinning electric current within ferromagnetic atoms of certain elements, persisting indefinitely in accord with well-defined quantum rules.
In specific ferromagnetic materials, the orientation axis of each atomic electromagnet is flexible.
The orientation of magnetic flux both internal and external to the material, pivots easily.
Such materials are referred to as magnetically “soft”, due to this magnetic flexibility.
Permanent magnet materials are magnetically “hard”. The orientation axis of each is fixed in place within a rigid crystal structure. The total magnetic field produced by these atoms cannot easily move.
This constraint aligns the field of ordinary magnets permanently, hence the name “permanent”.
The axis of circular current flow in one ferromagnetic atom can direct the axis of magnetism within another ferromagnetic atom, through a process known as “spin exchange”. This gives a soft magnetic material, like raw iron, the useful ability to aim, focus and redirect the magnetic field emitted from a magnetically hard permanent magnet. In the present invention, a permanent magnet’s rigid field is sent into a magnetically flexible “soft” magnetic material. the permanent magnet’s apparent location, observed from points within the magnetically soft material, will effectively move, vibrate, and appear to shift position when the magnetisation of the soft magnetic material is modulated by ancillary means (much like the sun, viewed while underwater, appears to move when the water is agitated).
By this mechanism, the motion required for generation of electricity can be synthesized within a soft magnetic material, without requiring physical movement or an applied mechanical force.
Background This invention relates to a method and device for generating electrical power using solid state means.
It has long been known that moving a magnetic field across a wire will generate an electromotive force (EMF), or voltage, along the wire. When this wire is connected in a closed electrical circuit, an electric current, capable of performing work, is driven through this closed circuit by the induced electromotive force.
Permanent magnet materials are magnetically “hard”. The orientation axis of each is fixed in place within a rigid crystal structure. The total magnetic field produced by these atoms cannot easily move.
This constraint aligns the field of ordinary magnets permanently, hence the name “permanent”.
The magnets may be formed of any polarised magnetic material. In order of descending effectiveness, the most desirable permanent magnet materials are Neodymium-Iron-Boron (“NIB”), Samarium Cobalt, AlNiCo alloy, or “ceramic” Strontium-Barium or Lead-Ferrite.
Magnetic flux adds together in these zones, where induced magnetic flux (c) aids the input flux (a).
This is the reverse of typical generator action, where induced flux (c) is typically opposing the “input” flux originating the induction. Since the magnetic interaction is a combination of magnetic flux opposition and magnetic flux acceleration, there is no longer an overall magnetic braking or total opposition effect. The braking and opposition is counterbalanced by a simultaneous magnetic acceleration within the core. Since mechanical motion is absent, the equivalent electrical effect ranges from idling, or absence of opposition, to a strengthening and overall acceleration of the electrical input signal (within coils 6).
It has also long been known that this resulting electric current causes the closed circuit to become encircled with a secondary, induced magnetic field, whose polarity opposes the primary magnetic field which first induced the EMF. this magnetic opposition creates mutual repulsion as a moving magnet approaches such a closed circuit, and a mutual attraction as that moving magnet moves away from the closed circuit. Both these actions tend to slow or cause “drag” on the progress of the moving magnet, causing the electric generator to act as a magnetic brake, whose effect is in direct proportion to the amount of electric current produced.
Key to understanding:
All ferromagnetic atoms and “magnetic metals” contain such quantum atomic electromagnets.
In specific ferromagnetic materials, the orientation axis of each atomic electromagnet is flexible.
The orientation of magnetic flux both internal and external to the material, pivots easily.
Such materials are referred to as magnetically “soft”, due to this magnetic flexibility.
The axis of circular current flow in one ferromagnetic atom can direct the axis of magnetism within another ferromagnetic atom, through a process known as “spin exchange”. This gives a soft magnetic material, like raw iron, the useful ability to aim, focus and redirect the magnetic field emitted from a magnetically hard permanent magnet. In the present invention, a permanent magnet’s rigid field is sent into a magnetically flexible “soft” magnetic material. the permanent magnet’s apparent location, observed from points within the magnetically soft material, will effectively move, vibrate, and appear to shift position when the magnetization of the soft magnetic material is modulated by ancillary means (much like the sun, viewed while underwater, appears to move when the water is agitated). By this mechanism, the motion required for generation of electricity can be synthesized within a soft magnetic material, without requiring physical movement or an applied mechanical force.
The synthesized magnetic motion is produced without either mechanical or electrical resistance.
This synthesized magnetic motion is aided by forces generated in accordance with Lenz’s Law, in order to produce acceleration of the synthesized magnetic motion, instead of physical “magnetic braking” common to mechanically-actuated electrical generators.
A primary factor determining permanent magnet material composition is the magnetic flux strength of the particular material type. In an embodiment of the invention, these magnets may also be substituted with one or more electromagnets producing the required magnetic flux. In another embodiment of the invention, a superimposed DC current bias can be applied to the output wire to generate the required magnetic flux, replacing or augmenting the permanent magnets.
This core is a critical component of the generator.
The core determines the output power capacity, the optimum magnet type, the electrical impedance and the operating frequency range. the core may be any shape, composed of any ferromagnetic material, formed by any process (sintering, casting, adhesive bonding, tape-winding, etc.)
The existence of negative energy/effects. Scientific American, January 2000
from TerryBoyce Website
recovered through WayBackMachine Website
Spanish version.
The construction of worm holes and warp drive would require a very unusual form of energy.
Unfortunately, the same laws of physics that allow the existence of this “negative energy” also appear to limit its behavior If a wormhole could exist, it would appear as a spherical opening to an otherwise distant part of the cosmos. In this doctored photograph of Times Square, the wormhole allows New Yorkers to walk to the Sahara with a single step, rather than spending hours on the plane to Tamanrasset. although such a wormhole does not break any known laws of physics, it would require the production of unrealistic amounts of negative energy.
Can a region of space contain less than nothing?
Common sense would say no; the most one could do is remove all matter and radiation and be left with vacuum. But quantum physics has a proven ability to confound intuition, and this case is no exception. A region of space, it turns out, can contain less than nothing. Its energy per unit volume – the energy density – can be less than zero.
Needless to say, the implications are bizarre. According to Einstein’s theory of gravity, general relativity, the presence of matter and energy warps the geometric fabric of space and time. What we perceive as gravity is the space-time distortion produced by normal, positive energy or mass.
But when negative energy or mass – so-called exotic matter – bends space-time, all sorts of amazing phenomena might become possible: traversable wormholes, which could act as tunnels to otherwise distant parts of the universe; warp drive, which would allow for faster-than-light travel; and time machines, which might permit journeys into the past.
Negative energy could even be used to make perpetual-motion machines or to destroy black holes. A Star Trek episode could not ask for more.
For physicists, these ramifications set off alarm bells. The potential paradoxes of backward time travel–such as killing your grandfather before your father is conceived–have long been explored in science fiction, and the other consequences of exotic matter are also problematic. They raise a question of fundamental importance: Do the laws of physics that permit negative energy place any limits on its behaviour?
We and others have discovered that nature imposes stringent constraints on the magnitude and duration of negative energy, which (unfortunately, some would say) appear to render the construction of wormholes and warp drives very unlikely.
Double Negative
Before proceeding further, we should draw the reader’s attention to what negative energy is not.
It should not be confused with antimatter, which has positive energy. When an electron and its antiparticle, a positron, collide, they annihilate. The end products are gamma rays, which carry positive energy. If antiparticles were composed of negative energy, such an interaction would result in a final energy of zero.
One should also not confuse negative energy with the energy associated with the cosmological constant, postulated in inflationary models of the universe [see ” Cosmological Antigravity,” by Lawrence M. Krauss; SCIENTIFIC AMERICAN, January 1999]. Such a constant represents negative pressure but positive energy. (Some authors call this exotic matter; we reserve the term for negative energy densities.)
The concept of negative energy is not pure fantasy; some of its effects have even been produced in the laboratory. They arise from Heisenberg’s uncertainty principle, which requires that the energy density of any electric, magnetic or other field fluctuate randomly. Even when the energy density is zero on average, as in a vacuum, it fluctuates.
Thus, the quantum vacuum can never remain empty in the classical sense of the term; it is a roiling sea of “virtual” particles spontaneously popping in and out of existence [see “Exploiting Zero-Point Energy,” by Philip Yam; SCIENTIFIC AMERICAN, December 1997]. In quantum theory, the usual notion of zero energy corresponds to the vacuum with all these fluctuations.
So if one can somehow contrive to dampen the undulations, the vacuum will have less energy than it normally does–that is, less than zero energy.
Waves of light ordinarily have a positive or zero energy density at different points in space (top). But in a so-called squeezed state, the energy density at a particular instant in time can become negative at some locations (bottom). To compensate, the peak positive density must increase.
As an example, researchers in quantum optics have created special states of fields in which destructive quantum interference suppresses the vacuum fluctuations. These so-called squeezed vacuum states involve negative energy. More precisely, they are associated with regions of alternating positive and negative energy.
The total energy averaged over all space remains positive; squeezing the vacuum creates negative energy in one place at the price of extra positive energy elsewhere. A typical experiment involves laser beams passing through nonlinear optical materials [see “Squeezed Light,” by Richart E. Slusher and Bernard Yurke; SCIENTIFIC AMERICAN, May 1988]. The intense laser light induces the material to create pairs of light quanta, photons. These photons alternately enhance and suppress the vacuum fluctuations, leading to regions of positive and negative energy, respectively.
Another method for producing negative energy introduces geometric boundaries into a space. In 1948 Dutch physicist Hendrik B. G. Casimir showed that two uncharged parallel metal plates alter the vacuum fluctuations in such a way as to attract each other. The energy density between the plates was later calculated to be negative. In effect, the plates reduce the fluctuations in the gap between them; this creates negative energy and pressure, which pulls the plates together.
The narrower the gap, the more negative the energy and pressure, and the stronger is the attractive force.
The Casimir effect has recently been measured by Steve K. Lamoreaux of Los Alamos National Laboratory and by Umar Mohideen of the University of California at Riverside and his colleague Anushree Roy. Similarly, in the 1970s Paul C. W. Davies and Stephen A. Fulling, then at King’s College at the University of London, predicted that a moving boundary, such as a moving mirror, could produce a flux of negative energy.
For both the Casimir effect and squeezed states, researchers have measured only the indirect effects of negative energy.
Direct detection is more difficult but might be possible using atomic spins, as Peter G. Grove, then at the British Home Office, Adrian C. Ottewill, then at the University of Oxford, and one of us (Ford) suggested in 1992.
Gravity and Levity
The concept of negative energy arises in several areas of modern physics.
It has an intimate link with black holes, those mysterious objects whose gravitational field is so strong that nothing can escape from within their boundary, the event horizon.
In 1974 Stephen W. Hawking of the University of Cambridge made his famous prediction that black holes evaporate by emitting radiation [see “The Quantum Mechanics of Black Holes,” by Stephen W. Hawking; SCIENTIFIC AMERICAN, January 1977].
A black hole radiates energy at a rate inversely proportional to the square of its mass. Although the evaporation rate is large only for subatomic size black holes, it provides a crucial link between the laws of black holes and the laws of thermodynamics. The Hawking radiation allows black holes to come into thermal equilibrium with their environment.
At first glance, evaporation leads to a contradiction. The horizon is a one-way street; energy can only flow inward. So how can a black hole radiate energy outward? Because energy must be conserved, the production of positive energy – which distant observers see as the Hawking radiation – is accompanied by a flow of negative energy into the hole. Here the negative energy is produced by the extreme space-time curvature near the hole, which disturbs the vacuum fluctuations. In this way, negative energy is required for the consistency of the unification of black hole physics with thermodynamics.
The black hole is not the only curved region of space-time where negative energy seems to play a role. Another is the worm hole – a hypothesized type of tunnel that connects one region of space and time to another. Physicists used to think that wormholes exist only on the very finest length scales, bubbling in and out of existence like virtual particles [see “Quantum Gravity, by Bryce S. DeWitt; SCIENTIFIC AMERICAN, December 1983]. In the early 1960s physicists Robert Fuller and John A. Wheeler showed that larger wormholes would collapse under their own gravity so rapidly that even a beam of light would not have enough time to travel through them.
But in the late 1980s various researchers – notably Michael S. Morris and Kip S. Thorne of the California Institute of Technology and Matt Visser of Washington University – found otherwise.
Certain wormholes could in fact be made large enough for a person or spaceship. Someone might enter the mouth of a wormhole stationed on Earth, walk a short distance inside the wormhole and exit the other mouth in, say, the Andromeda galaxy. The catch is that traversable wormholes require negative energy. Because negative energy is gravitationally repulsive, it would prevent the wormhole from collapsing.
For a wormhole to be traversable, it ought to (at bare minimum) allow signals, in the form of light rays, to pass through it. Light rays entering one mouth of a wormhole are converging, but to emerge from the other mouth, they must defocus – in other words, they must go from converging to diverging somewhere in between [see illustration below]. This defocusing requires negative energy.
Whereas the curvature of space produced by the attractive gravitational field of ordinary matter acts like a converging lens, negative energy acts like a diverging lens.
Climate change which is real but carbon dioxide in itself is, was nor will be a climates changer, just a big lie. To be able to charge everybody. Carbon dioxide is the raw material for the carbon-hydrates. Simple.
and processes is known in the art of making magnetic cores. Effective common materials include amorphous metal alloys (such as sold under the “Metglas” trademark by Metglas Inc., Conway, S.C.), nanocrystalline alloys, manganese and zinc ferrites as well as ferrites of any suitable element including any combination of magnetically “hard” and “soft” ferrites, powdered metals and ferromagnetic alloys, laminations of cobalt and/or iron and silicon-iron “electrical steel”.
The Phi-Transformer. Toroidal shapes are clearly important in many devices which pull in additional energy from the environment, even to the extent that Bob Boyce warns against the high-frequency sequential pulsing of coils wound on a toroid yoke, producing a rotating magnetic field as unpredictable surge events can generate some 10,000 amps of additional current which will burn out the circuit components and can very well trigger a radiant energy build up which can create a lightning strike. It is electrical in nature. In actual fact, magnetism and electricity are not two separate things,
but instead, they are different aspects of the same thing, so both should really be referred to as
“electromagnetism”. The wave has two components on the vertical part being the electric charge and magnetic forces moving the charge. You do need soft magnets. Most known and in use for a long time is the Hans Coler device patented well before the WW2 in Germany. Almost all underground installations and Alien/human research installation’s /town run by the Deep State/cabal. Same people who are in Davos pushing the fake carbon dioxide show including Dulce. Only the West/EU paying and the rest exempted even getting paid. Cost of so-called green energy is threefold of that of coal, killing our industry. Compensated by the EU and government by creating money out of nothing. India and China alone have been building between three and for big new coal burning electric powerplants a week.
The magnetic flux from a permanent magnet consists of two components.
One component is rotary and it spreads out in every direction.
The second component is linear and it gets swamped and hidden by the rotary field.
It is important that the voltage applied to the energising coil in this ‘conditioning’ process be a perfect
sinewave. Shock, or outside influence can destroy the ‘conditioning’ but it can be reinstated by repeating
the conditioning process. It should be noted that the conditioning process may not be successful at the
first attempt but repeating the process on the same magnet is usually successful. Once conditioning is completed, the capacitors are no longer needed. The device then only needs a few milliwatts of 60 Hz applied to the input coil to give up to 1.5 kW at 60 Hz at the output coil. The output coil can then supply the input coil indefinitely. The conditioning process modifies the magnetization of the ferrite slab. Before the process the North pole is on one face of the magnet and the South pole on the opposite face. After conditioning, the South pole does not stop at the mid point but extends to the outer edges of the North pole face, extending inwards from the edge by about 6 mm. Also, there is a magnetic ‘bubble’ created in the middle of the North pole face and the position of this ‘bubble’ moves when another magnet is brought near it. The conditioned slab has three coil windings:
EARTH’S NUCLEUS AND ROLE OF THE PYRAMIDS
IN CONTROL OF ITS PROCESSES.
Application of two inventions of the author: method of geoholography and method of geohydrodiagnostics enabled to conduct Earth’s nucleus research. The research has been affected by means of microwave range frequency scanning and showed discrepancy between the existing understandings of the Earth’s nucleus structure with real one. Current opinion that the Earth’s nucleus consists of iron and nickel is based upon seismic observation data, without taking into consideration thermophysical characteristics of mentioned metals. Actually, iron and nickel are characterized by high thermo-conductivity and relatively low thermal heat capacity. That’s why both the Earth itself and its nucleus should have got cold for a thousand years’ period only. Then, what is the source of the volcanoes, geothermal waters and hot oil?
The research, conducted by means of quantum generator for scanning the Earth’s nucleus as well as special test attachments, enabled to determine its real diameter and composition with great precision. The Earth’s nucleus consists of 7 shells, varying in thickness and composition. The nucleus radius is equal to 2340+30 Km. The thickness of the outer layer is about 430 Km. It is on alloy of sand and clay with insertions of graphite, diamonds, ruby and other crystals. The next shell is about 220 Km. and is composed of a various liquid metals’ conglomerate: lead, platinum, gold, silver, copper, nickel, tin, etc. The thickness of the next shell is about 90 Km. and is composed of liquid lead. The next shell is approximately 360 Km. long and is composed of uranium. The next shell is about 70 Km. long, is composed of graphite, serves as delay mechanism and reflector of neutrons. Under this shell we can found 90 Km. layers of inert gases. It is the zone of convective thermo exchange in the gas area of the nucleus. The central part of the nucleus is composed of the of light gas elements, which participate in the reaction of thermonuclear fusion as well as its products (hydrogen, deuterium, tritium, helium, nitrogen, carbonic acid, lithium, methane, oxygen, etc.). The thickness of this shell is about 720 Km by radius. Thus, it has for the first time been found, that the reactions of nuclear fusion are being happened in the earth’s nucleus. These processes are of the same nature with those, being happened inside the sun. Following the exhaust of the matter, which participates in the reactions, a gradual decrease of temperature should have been occurred. However, owing to the circumstances, beyond our understanding, things are going another way. Since, the volcanic activity increases from time to time, we have a sound reason to believe that alongside with nuclear fusion reactions, the processes of uranium accumulation and fusion are being underway. However, influences of other factors are admit table. Thus, for example, comparing an explosive nature of solar reactions with rather calm processes inside the Earth’s nucleus, it seems reasonable to believe that certain energies could exist. These hypothetic energies might control and restrain nuclear fusion and decay as well as additionally heat metallic nucleus shells. Having analysed energy exchange in the Great Pyramids of Egypt as well as Seven Sevastopol Pyramids, which have been found by us, the author came to the following conclusions: – the high frequency cosmic energy comes to the tops of the whole group of the Pyramids through 3 channels, varying in frequency. Inside the Pyramid this energy is converting into low-frequency one, and is summarizing and penetrates by a focused beam down to graphite nucleus’ shell. Simultaneously, by means of inductive influence of this energy, metal-composed shells are additionally heated. Energy distribution analysis taken by a separately chosen Pyramid, located in different parts of the planet, revealed an unexpected result: certain group of Pyramids serves only as a receiver of Cosmic energy, another group – only as a transmitter using diamond layer as big quantity of lasers. This proved to be very high frequency energy. However, a certain part of this energy is converting into low-frequency one is radiate into open Space. The model of the interaction of the Pyramids and Earth’s nucleus is presented at pic. 1.
Willing to find the source of the cosmic energy, the author composed the holograms of the sky and synchronized them with the holograms of the parts of the Earth, containing Pyramids (Egypt, Himalayas, England, Mexico, Sevastopol, Easter Island and Bermuda Islands). Having hologrammically tracked the energy flows, the author revealed that Himalayas and Bermuda Pyramids provide energy exchange of the Earth’s nucleus with Alpha Aureus (Capella); Mexican and English (Stonehenge) – with Alpha Lyra (Vega); Egyptian, Sevastopol and Easter Island – with Alpha Cule (Canopus).Each Star of Northern Celestial Hemisphere controls two groups of Pyramids. One group serves as a receiver, whereas another as a transmitter to the Star. The Stars are located under the 120″ angle in relation to each other, thus, creating electromagnetic momentums, effecting the position of the Earth’s axis, and, probably, its rotation. However, in accordance with the laws of celestial mechanics, one more group of Pyramids should have been existed, in order to get the equality of momentums of the Northern and Southern Earth Hemispheres. According to the mathematical calculation, this group of Pyramids must have been existed in the center of South America. These missing Pyramids have been found in Brasilia. The whole scheme of energy exchange with stars is shown at Pic.2.
In view of the above-mentioned, the following conclusions could be deducted: – The Pyramids play an important role in control of the Earth’s nucleus, position of the Earth’s axis and the rotation of the Globe. That is why it seems intuitively clear, that is very significant to preserve the entirety of the Pyramids’ structure. The decreased vertical energy exchange Pyramids should be specially treated by the cosmic energy for the sake of vertical conductivity restoration. This work could be performed New Age Masters Restoration of the Pyramids’ direct function could contribute the prolongation of the current civilization and to ease the Transitive collapses.
The author,
assistant technical sciences, professor Vitaly A. Gokh. academician
Back to: A Practical Guide to ‘Free Energy’ Devices
Devices Part 5: Last updated: 10th December 2007
Author: Patrick J. Kelly
- Energy can be taken from “permanent” magnets Johnson, Camus, Bedini, Ecklin, Coler, Sweet, Bearden, Davidson, Gunderson, Flynn, etc. Nelson Camus. Nelson Camus built a motor using only permanent magnets as the power source. He stated that it was difficult to adjust the magnets to the correct positions but that when he did, the motor ran uninterrupted for six months. An output power of 300 Watts has been produced.
Nelson Camus.
With ferrite magnets some 600 rpm has been achieved and with NIB magnets 3000 rpm. As far as I am aware, nobody else has built a working copy. He states that the moveable aluminium sheets are essential to the operation in addition to acting as a start/stop mechanism.
Here is a sketch of the arrangement: There are two, non-magnetic rotors on the central shaft, one near each end of the shaft. These are adjustable from 85 to 89 degrees to each other, i.e., nearly at right angles to each other but not quite.
The thick aluminium plates modify the magnetic field and so are essential for operation of the motor.
The pairs of aluminium plates at each end of the cylinder are adjustable separately. The stator magnets are adjustable in height and lateral position and this is done to tune the motor once it has started running.
It appears that much skill and perseverance are needed to get this motor operational, but once it has been adjusted, it runs indefinitely.
Details can be seen on the http://jnaudin.free.fr/html/trmdiag.htm web site.
John Bedini has produced a very simple motor design which uses only permanent magnets: Here, the magnetic field of the stator magnet is altered by the iron yoke. This gives the rotor magnets a push as they pass by, and dampens the opposing thrust which would normally inhibit the rotation.
John W. Ecklin was granted US Patent Number 3,879,622 on 29th March 1974. The patent is for a magnet/electric motor generator which produces an output greater than the input necessary to run it. There are two styles of operation.
The main illustration for the first is:
Here, the (clever) idea is to use a small low-power motor to rotate a magnetic shield to mask the pull of two magnets. This causes a fluctuating magnet field which is used to rotate a generator drive.
In the diagram above, the motor at point ‘A’ rotates the shaft and shielding strips at point ‘B”.
These rectangular mu-metal strips form a very conductive path for the magnetic lines of force when they are lined up with the ends of the magnets and they effectively shut off the magnet pull in the area of point ‘C’. At point ‘C’, the spring-loaded traveller is pulled to the left when the right-hand magnet is shielded and the left hand magnet is not shielded. When the motor shaft rotates further, the traveller is pulled to the right when the left-hand magnet is shielded and the right hand magnet is not shielded. This oscillation is passed by mechanical linkage to point ‘D’ where it is used to rotate a shaft used to power a generator. As the effort needed to rotate the magnetic shield is relatively low, it is claimed that the output exceeds the input and so can be used to power the motor which rotates the magnetic shield.
The second method for exploiting the idea is shown in the patent as: Here, the same shielding idea is utilized to produce a reciprocating movement which is then converted to two rotary motions to drive two generators. The pair of magnets ‘A’ are placed in a housing and pressed towards each other by two springs. When the springs are fully extended, they are just clear of the magnetic shield ‘B’
When a small electric motor (not shown in the diagram) moves the magnetic shield out of the way, the two
A modification of this idea is the Brown-Ecklin Generator. In this arrangement, the movable magnetic
shielding arrangement provides a direct electrical output rather than a mechanical movement:
Here, the same motor and rotating magnetic shield arrangement is used, but the magnetic lines of force are blocked from flowing through a central I-piece.
This I-piece is made of laminated iron slivers and has a pickup coil or coils wound around it.
The device operates as follows: In the position shown on the left, the magnetic lines of force flow
downwards through the pickup coils. When the motor shaft has rotated a further ninety degrees, the
situation on the right occurs and there, the magnetic lines of force flow upwards through the pickup coils.
This is shown by the blue arrows in the diagram. This reversal of magnetic flux takes place four times for
every rotation of the motor shaft.
Invention Intelligence (India). The following design for a permanent magnet motor was published in the
April 1977 issue of ‘Invention Intelligence’ in India: This design relies on the magnetic field of a
magnet being distorted by having the pole faces angled at 45 degrees. In the diagram, the magnets are shown in blue and they are mounted in a non-magnetic stator and rotor material shown in grey. The rotor is mounted on two ball races shown in yellow.
The theory is that the repulsing forces of the four North-North outer magnet pairs along with the repulsing forces of the four inner South-South magnet pairs should be continuously greater than the
North-South attracting forces, thus giving continuous rotation.
It appears most likely that this design is just a theory and that a working model has never been constructed.
However, it is possible that this system might work very well, so the information is presented here for
interest and possible experimentation.
It might be remarked that making the magnet face have a 45 degree angle may well not skew the magnetic field sufficiently to give a big enough imbalance to provide significant drive power. One way to increase the effect might be to use a mu-metal strip along the back of each magnet. Mu-metal is an expensive material which conducts magnetic lines of force in a phenomenal way and so soaks up any magnetism near it.:
(and very limited practical information available) was produced by Floyd Sweet. The device was dubbed
“Vacuum Triode Amplifier” or “VTA” by Tom Bearden and the name has stuck, although it does not appear to be a particularly accurate description. The device was capable of producing more than 1 kW of output power at 120 Volts, 60 Hz and is self-powered. The output is energy which resembles electricity in that it powers motors, lamps, etc. but as the power increases through any load there is a temperature drop instead of the expected temperature rise. When it became known that he had produced the device he became the target of serious threats, some of which were delivered face-to-face in broad daylight. It is quite possible that the concern was due to the device tapping zero-point energy, which when done at high currents opens a whole new can of worms.
the measured weight of the apparatus reduced by about a pound. While this is hardly new, it suggests that space/time was being warped. The German scientists at the end of WWII had been experimenting with this (and killing off the unfortunate people who were used to test the system) – if you have considerable perseverance, you can read up on this in Nick Cook’s inexpensive book “The Hunt for Zero-Point” ISBN 0099414988.
Floyd found that the weight of his device reduced in proportion to the amount of energy being produced.
But he found that if the load was increased enough, a point was suddenly reached where a loud sound like a whirlwind was produced, although there was no movement of the air. The sound was heard by his wife Rose who was in another room of their apartment and by others outside the apartment. Floyd did not increase the load further (which is just as well as he would probably have received a fatal dose of radiation if he had) and did not repeat the test. In my opinion, this is a dangerous device and I personally, would not recommend anyone attempting to build one. It should be noted that a highly lethal 20,000 Volts is used to ‘condition’ the magnets and the principles of operation are not understood at this time.
Also, there is insufficient information to hand to provide realistic advice on practical construction details. On one occasion, Floyd accidentally short-circuited the output wires. There was a bright flash and the wires became covered with frost. It was noted that when the output load was over 1 kW, the magnets and coils powering the device became colder, reaching a temperature of 20 degrees Fahrenheit below room temperature. On one occasion, Floyd received a shock from the apparatus with the current flowing between the thumb and the small finger of one hand. The result was an injury akin to frostbite, causing him considerable pain for at least two weeks.
Observed characteristics of the device include: 1.
The output voltage does not change when the output power is increased from 100W to 1 kW.
2. The device needs a continuous load of at least 25W.
3. The output falls in the early hours of the morning but recovers later on without any intervention.
4. A local earthquake can stop the device operating.
5. The device can be started in self-powered mode by briefly applying 9 Volts to the drive coils.
- The device can be stopped by momentary interruption of the power to the power coils. Conventional instruments operate normally up to an output of 1 kW but stop working above that output level, with their readings showing zero or some other spurious reading. Information is limited, but it appears that Floyd’s device was comprised of one or two large ferrite permanent magnets (grade 8, size 150 mm x 100 mm x 25 mm) with coils wound in three planes mutually at right angles to each other (i.e. in the x, y and z axes). The magnetisation of the ferrite magnets is modified by suddenly applying 20,000 Volts from a bank of capacitors (510 Joules) or more to plates on each side of it while simultaneously driving a 1 Amp 60 Hz (or 50 Hz) alternating current through the energising coil. The alternating current should be at the frequency required for the output. The voltage pulse to the plates should be applied at the instant when the ‘A’ coil voltage reaches a peak. This needs to be initiated electronically. It is said that the powering of the plates causes the magnetic material to resonate for a period of about fifteen minutes, and that the applied voltage in the energising coil modifies the positioning of the newly formed poles of the magnet so that it will in future, resonate at that frequency and voltage.
It is important that the voltage applied to the energising coil in this ‘conditioning’ process be a perfect sinewave. Shock, or outside influence can destroy the ‘conditioning’ but it can be reinstated by repeating
the conditioning process. It should be noted that the conditioning process may not be successful at the first attempt but repeating the process on the same magnet is usually successful. Once conditioning is completed, the capacitors are no longer needed. The device then only needs a few milliwatts of 60 Hz applied to the input coil to give up to 1.5 kW at 60 Hz at the output coil. The output coil can then supply the input coil indefinitely. The conditioning process modifies the magnetisation of the ferrite slab. Before the process the North pole is on one face of the magnet and the South pole on the opposite face. After conditioning, the South pole does not stop at the mid point but extends to the outer edges of the North pole face, extending inwards from the edge by about 6 mm. Also, there is a magnetic ‘bubble’ created in the middle of the North pole face and the position of this ‘bubble’ moves when another magnet is brought near it. The conditioned slab has three coil windings:
- The ‘A’ coil is wound first around the outer perimeter, each turn being 150 + 100 + 150 + 100 = 500 mm
long (plus a small amount caused by the thickness of the coil former material). It has about 600 turns of
28 AWG (0.3 mm) wire. - The ‘B’ coil is wound across the 100 mm faces, so one turn is about 100 + 25 + 100 + 25 = 250 mm
(plus a small amount for the former thickness and clearing coil ‘A’).
It has between 200 and 500 turns of 20 AWG (1 mm) wire. - The ‘C’ coil is wound along the 150 mm face, so one turn is 150 + 25 + 150 + 25 = 350 mm
(plus the former thickness, plus clearance for coil ‘A’ and coil ‘B’).
It has between 200 and 500 turns of 20 AWG (1 mm) wire and should match the resistance of coil ‘B’ as
closely as possible.
Coil ‘A’ is the input coil.
Coil ‘B’ is the output coil.
Coil ‘C’ is used for the conditioning and for the production of gravitational effects.
Much of this information and photographs of the original device can be found on the website:
“http://www.intalek.com/Index/Projects/Research/Construction%20of%20the%20Floyd%20Sweet’s%20VTA%20by
%20Watson.htm” where a paper by Michael Watson gives much practical information.
For example, he states that an experimental set up which he made, had the ‘A’ coil with a resistance of 70
ohms and an inductance of 63 mH,
the ‘B’ coil, wound with 23 AWG wire with a resistance of 4.95 ohms and an inductance of 1.735 mH, and the
‘C’ coil, also wound with 23 AWG wire, with a resistance of 5.05 ohms and an inductance of 1.78 mH.
In passing, if the gravity thrust aspect of this information interests you, let me mention a television
documentary programmed which you may not have seen. In it, Boyd Bushman demonstrated what might just have
been a simplistic gravity thrust device. Boyd is a US weapons designer of 35 years experience.
He designed the prototype for the ‘Stinger’ missile. He moved to Lockheed as a designer.
There he experimented with various things including the model he demonstrated.
It consisted of 250 turns of 30 AWG enameled wire wound in a circular bundle about 200 mm in diameter.
The winding was circular in cross section and air cored.
The turns were secured by masking tape, some of which was used to tether the ring to a table top.
He then plugged the coil directly in to the 110V 60 Hz mains supply. The ring immediately lifted off the table. Boyd described the device as dangerous as it becomes very hot in just a few seconds.
He stated that in his opinion, fed with different voltage and frequency, the ring could be made able to provide thrust for a full-scale flying vehicle.
Tom Bearden. Tom Bearden, Stephen Patrick, James Hayes, Kenneth Moore and James Kenny were granted US Patent 6,362,718 on 26th March 2002. This patent is for an electromagnetic generator with no moving parts.
This device can be self-powered and is described on JL Naudin’s excellent site at http://jnaudin.free.fr/meg/megv21.htm where test results are shown. This device has been shown to have a greater output than its input and an output five times higher than the input has been mentioned.
The “Motionless Electromagnetic Generator” or “MEG” consists of a magnetic ring with output coils wound on it.
Inside the ring is a permanent magnet to provide a steady magnetic flux around the ring.
Superimposed on the ring are two electromagnets which are activated one after the other to make the magnetic flux oscillate. This is very much like Floyd Sweet’s “VTA” device.
The external power source shown above is intended to be disconnected when the circuit starts operating, at which time, part of the output from one of the pick-up coils is fed back to power the circuit driving
the oscillator coils. The circuit then becomes self-sustaining, with no external input but with a continuous electrical output.
If you should construct one of these, please be warned that it should not
be started up unless there is an external load across the pick-up coils, otherwise dangerous, potentially lethal voltages can be produced. Don’t get yourself killed or injured – please be very careful.
A re-worded excerpt from the patent for this system, is in PatD4 of this set of documents and it gives the construction details of the prototype: dimensions, number of turns, materials used, drive frequency,
monostable pulse durations, etc.
The prototype produced two outputs of 48 watts for one input of 12 watts.
This allowed the input power to be taken from one of the outputs, while that same output was powering other loads.
This device is essentially, a custom-built transformer with two primary windings (the oscillator coils) and two secondary windings (the pick-up coils), with a permanent magnet inserted to create a standing magnetic field through the yoke (frame) of the transformer.
However, a permanent magnet has two separate energy streams coming from it.
The main field is the magnetic field which is very well known. It normally flows out in every direction,
but in the MEG, a very good conducting path is provided by the frame of the device. This traps the magnetic energy flow and channels it around inside the frame. This prevents it masking the second energy field which is the Electrical energy field.
With the magnetic field moved out of the way, it is now possible to tap this energy field for additional
power output. The MEG looks like a very simple device, but in actual fact, it is not. To act as a
successful device with a Coefficient of Performance (COP) over 1, where the input power which is provided is less than the useful power output of the device, then Tom says that the frame needs to be made from a nanocrystalline material. This material has special properties which give the MEG it’s exceptional output and it is described in Device Patents No 4. in this series of documents.
Care has to be taken with this device as the output power can be so high that it can burn the insulation off the wires and destroy the device if the output power is not controlled carefully.
The output power is normally limited to a COP of 5.4 for practical reasons.
If the necessary input power is taken from the output power via a rigorous control circuit which prevents runaway, then the device can provide output power while no outside input power is needed.
The output power is controlled by the waveform being sent to the oscillator coils.
The power is controlled by the exact shape of the “square wave” drive:
The waveform is also adjustable for frequency and Mark/Space ratio. As it is some years since this device was patented, the question can be asked as to why it is not in production and offered for sale everywhere.
The reason is that the MEG is a laboratory prototype which needs careful adjustment and tweaking.
It has been replicated by others and it’s performance verified as being COP>1, but it is not yet ready for production where it is necessary to have the design enhanced to the stage that it can be assembled in a
factory and work immediately without the need for manual adjustments. That development is in hand and may be completed in the next year or two.
Some further explanation is in order. The MEG has an overall efficiency, well below 100% in spite of having ( Coefficient Of Performance well in excess of 1. The COP of 5.4 mentioned earlier is an arbitrary figure selected by the designers to prevent the insulation being burnt off the output wires.
The actual maximum output is almost unlimited, certainly a COP of 100 is perfectly possible, but quite unnecessary in practical terms.
If a standard laminated iron yoke is used for the MEG, it will never have a COP>1 as input power will be needed to make it operate. The magnetic flux from a permanent magnet consists of two components.
One component is rotary and it spreads out in every direction.
The second component is linear and it gets swamped and hidden by the rotary field.
If a toroidal yoke wound with an input winding over its whole length is used, then that traps all of the
rotating magnetic field inside the toroid. The snag is that this requires considerable input power to energise the toroidal winding. The big advance with the MEG is that the inventors have discovered some standard off-the-shelf nanocrystalline materials which have the property of trapping the rotational magnetic field inside a toroid formed from them, without the need for any energising coil.
This is a major boost to the functioning of the device. Now, with the rotational magnetic field trapped inside the toroid, the liner field becomes accessible, and it is a very useful field indeed.
It is electrical in nature. In actual fact, magnetism and electricity are not two separate things, but instead, they are different aspects of the same thing, so both should really be referred to as “electromagnetism”. Anyway, the linear field is easy to access once the rotational field has been removed.
All that is necessary is to pulse it sharply. When that is done, real electricity is introduced into the MEG from the surrounding environment. The sharper the waveform, the greater the additional electrical input becomes.
This is what makes the MEG have a COP of say, 5.4 which is a practical working output.
If the output is then manipulated to provide the input power needed for the pulsing, the COP effectively becomes infinite as you do not have to provide any power to make it work and you have a substantial power output. The power output divided by the power input you have to provide to make the device operate, gives the COP rating, so any output divided by zero input, always gives infinity.
Dave Lawton has experimented with the MEG arrangement, using a professionally constructed custom laminated iron yoke. He found that using the standard arrangement, he found no difference when he removed
the permanent magnet. Testing various configurations, he found that the most effective set-up for his components is:
each side of the yoke, and bridged together with two straight vertical sections of laminated iron bar.
This arrangement is sensitive to the exact position of these magnets and tuning is achieved by moving the group of four magnets and two bars (effectively two “horseshoe” magnets) slightly left or right to find
the optimum position.
There are other devices which are very close to the MEG construction. One of these is at present being displayed on the web page http://www.inkomp-delta.com/page8.html, though for full understanding of what is being said, considerable language skills are needed as the translation programs fail dramatically when asked to translate this information.
However, the following information appears to be displayed there by Elin Pelin and Valeri Ivanov and dated 11th February 2007:
An effective device can be constructed from a permanent magnet, a toroid and a laminated iron yoke.
The arrangement is displayed like this:
It appears that when the switch is made from State 1 to State 2, that a rotating magnetic field is set up in the toroid. Presumably, the switching will be caused by pulsing a coil wound around the yoke and the
output power pick-up from a coil around the toroid like this:
If you are fluent in Russian (or whatever language is used on the web site) it would be most helpful if you would let me know if this description is accurate, and if there are any important additional details
which need to be stressed, or ant experimental results which it would be useful to know about.
The Phi-Transformer. Toroidal shapes are clearly important in many devices which pull in additional energy from the environment, even to the extent that Bob Boyce warns against the high-frequency sequential pulsing of coils wound on a toroid yoke, producing a rotating magnetic field as unpredictable surge events can generate some 10,000 amps of additional current which will burn out the circuit components and can very well trigger a radiant energy build up which can create a lightning strike.
However, it operates in quite a different way: Here, lines of magnetic flux coming from a permanent magnet are channelled through a laminated yoke which is effectively a circular mains transformer core.
The difference is in the fact that instead of electronically driving a coil to alter the flux coming from the permanent magnet, in this system the magnet is rotated by a small motor.
The performance of this device is impressive. The power required to rotate the magnet is not unduly affected by the current drawn from the coils.
The Dave Squires Generator.
At http://jnaudin.free.fr/html/dsqromg2.htm a generator design is shown, dated 1999. All attempts to contact Dave Squires have been unsuccessful, so it is not known if the information there is from tests on a device which has actually been built or if it is just a theoretical
design, though it is likely that it was not built at that time.
A central core is produced by casting the shape shown below, using an amorphous iron powder / epoxy mix. However, as the operating frequency is low at only 50 Hz or 60 Hz, there does not seem to be any reason why normal transformer laminations should not be used, in which case six sets of shims shaped like this:
which would make the winding of the coils very much easier as standard bobbins could be slotted into place as the core yoke is being assembled. However, the complete core is shaped like this with coils placed in the slots: The thinking behind this arrangement is that the “back-EMF” magnetic flux which normally causes Lenz Law opposition to the free rotation of the magnets around the toroid, is diverted around behind the coil and turned so that instead of hindering the rotation, it actually assists it: The speed of rotation is quoted as being 1,000 rpm for 50 Hz and 1,200 rpm for 60 Hz, which appears incorrect to me, there being six pulses per rotation, so 500 rpm and 600 rpm would appear the actual rates of rotation required. The coil windings are suggested as being 180 turns of AWG 14 (16 SWG) for 120 volts AC, at a supposed current of 100 amps, which is quite unrealistic as the maximum current for that size of wire is 5.9 amps. The magnets are 2 inches long, 1 inch deep neodymium set into a circular rotor of 12 inch diameter. There can, of course, be more than one rotor on a single shaft, and the number of turns would be doubled for 240 volts AC output.
The yoke on which the coils are wound is effectively a series of toroid’s, though admittedly, not exactly circular is shape. An alternative shape which might be considered would be as shown below where the
section carrying the magnetic flux for any one coil is more isolated from the other toroid’s.
It is not clear if making the section which passes through the coil, straight rather than curved, so I will leave that detail to people who are expert in magnetics.
Dan Davidson.
Dan has produced a system rather similar to the ‘MEG’ described above. His system is different in that he uses an acoustic device to vibrate a magnet which forms the core of a transformer.
This is said to increase the output by a substantial amount. His arrangement looks like this:
Dan’s patent forms part of this set of documents and it gives details of the types of acoustic transducers which are suitable for this generator design.
Pavel Imris. Pavel was awarded a US patent in the 1970’s.
The patent is most interesting in that it describes a device which can have an output power which is more than nine times greater than the input power. He achieves this with a device which has two pointed
electrodes enclosed in a quartz glass envelope which contains xenon gas under pressure (the higher the pressure, the greater the gain of the device) and a dielectric material.
Here, the power supply to one or more standard fluorescent lamps is passed through the device.
This produces a power gain which can be spectacular when the gas pressure in the area marked ‘24’ and ‘25’ in the above diagram is high. The patent is included in this set of documents and it contains the following table of experimental measurements: Table 1 shows the data to be obtained relating to the optical electrostatic generator.
Table 2 shows the lamp performance and efficiency for each of the tests shown in Table 1. The following is a description of the data in each of the columns of Tables 1 and 2.
Column Description B Gas used in discharge tube
C Gas pressure in tube (in torrs) D Field strength across
the tube (measured in volts per cm. of length between the electrodes)
E Current density (measured in microamps per sq. mm. of tube cross-sectional area)
F Current (measured in amps) G Power across the tube (calculated in watts per cm. of length between the electrodes)
H Voltage per lamp (measured in volts)
K Current (measured in amps)
L Resistance (calculated in ohms)
M Input power per lamp (calculated in watts)
N Light output (measured in lumens) Table 1 Optical Generator Section A B C D E F G Test No. Type of discharge Pressure of Xenon Field strength Current density Current Power str. across lamp
lamp across lamp (Torr) (V/cm) (A/sq.mm) (A) (W/cm.) 1 Mo elec – – – – – 2 Xe 0.01 11.8 353 0.1818 2.14 3 Xe 0.10 19.6 353 0.1818 3.57 4 Xe 1.00 31.4 353 0.1818 5.72 5 Xe 10.00 47.2 353 0.1818 8.58 6 Xe 20.00 55.1 353 0.1818 10.02 7 Xe 30.00 62.9 353 0.1818 11.45 8 Xe 40.00 66.9 353 0.1818 12.16 9 Xe 60.00 70.8 353 0.1818 12.88 10 Xe 80.00 76.7 353 0.1818 13.95 11 Xe 100.00 78.7 353 0.1818 14.31 12 Xe 200.00 90.5 353 0.1818 16.46 13 Xe 300.00 100.4 353 0.1818 18.25 14 Xe 400.00 106.3 353 0.1818 19.32 15 Xe 500.00 110.2 353 0.1818 20.04 16 Xe 600.00 118.1 353 0.1818 21.47 17 Xe 700.00 120.0 353 0.1818 21.83 18 Xe 800.00 122.8 353 0.1818 22.33 19 Xe 900.00 125.9 353 0.1818 22.90 20 Xe 1,000.00 127.9 353 0.1818 23.26 21 Xe 2,000.00 149.6 353 0.1818 27.19 22 Xe 3,000.00 161.4 353 0.1818 29.35 23 Xe 4,000.00 173.2 353 0.1818 31.49 24 Xe 5,000.00 179.1 353 0.1818 32.56
Table 2 Fluorescent Lamp Section A H K L M N Test No. Voltage Current Resistance Input Energy Light Output (Volts) (Amps) (Ohms) (Watts) (Lumen) 1 220 0.1818 1,210 40.00 3,200 2 218 0.1818 1,199 39.63 3,200 3 215 0.1818 1,182 39.08 3,200 4 210 0.1818 1,155 38.17 3,200 5 200 0.1818 1,100 36.36 3,200 6 195 0.1818 1,072 35.45 3,200 7 190 0.1818 1,045 34.54 3,200 8 182 0.1818 1,001 33.08 3,200 9 175 0.1818 962 31.81 3,200 10 162 0.1818 891 29.45 3,200 11 155 0.1818 852 28.17 3,200 12 130 0.1818 715 23.63 3,200 13 112 0.1818 616 20.36 3,200 14 100 0.1818 550 18.18 3,200 15 85 0.1818 467 15.45 3,200 16 75 0.1818 412 13.63 3,200 17 67 0.1818 368 12.18 3,200 18 60 0.1818 330 10.90 3,200 19 53 0.1818 291 9.63 3,200 20 50 0.1818 275 9.09 3,200 21 23 0.1818 126 4.18 3,200 22 13 0.1818 71 2.35 3,200 23 8 0.1818 44 1.45 3,200 24 5 0.1818 27 0.90 3,200 The results from Test No. 24 where the gas pressure is a very high 5,000 Torr, show that the input power for each 40-watt standard fluorescent tubes is 0.9 watts for full lamp output. In other words, each lamp is working to its full specification on less than one fortieth of its rated input power. However, the power taken by the device in that test was 333.4 watts which with the 90 watts needed to run the 100 lamps, gives a total input electrical power of 423.4 watts instead of the 4,000 watts which would have been needed without the device. That is an output power of more than nine times the input power. From the point of view of any individual lamp, without using this device, it requires 40 watts of electrical input power to give 8.8 watts of light output which is an efficiency of about 22% (the rest of the input power being converted to heat). In test 24, the input power per lamp is 0.9 watts for the 8.8 watts of light produced, which is a lamp efficiency of more than 900%. The lamp used to need 40 watts of input power to perform correctly. With this device in the circuit, each lamp only needs 0.9 watts of input power which is only 2.25% of the original power.
Graham Gunderson Quite an impressive performance for so simple a device! Graham Gunderson On 27th July 2006, a patent application from Graham Gunderson for a Solid State Electric Generator was published (number US 2006/0163971 A1).
The details are as follows: Abstract A solid-state electrical generator including at least one permanent magnet, magnetically coupled to a ferromagnetic core provided with at least one hole penetrating its volume; the hole(s) and magnet(s) being placed so that the hole(s) intercept flux from the permanent magnet(s) coupled into the ferromagnetic core.
A first wire coil is wound around the ferromagnetic core for the purpose of moving the coupled permanent magnet flux within the ferromagnetic core.
A second wire is routed through the hole(s) penetrating the volume of the ferromagnetic core, for the purpose of intercepting this moving magnetic flux, thereby inducing an output electromotive force.
A changing voltage applied to the first wire coil causes coupled permanent magnet flux to move within the core relative to the hole(s) penetrating the core volume, thus inducing electromotive force along wire(s) passing through the hole(s) in the ferromagnetic core.
The mechanical action of an electrical generator is therefore synthesised without the use of moving parts.
Background This invention relates to a method and device for generating electrical power using solid state means. It has long been known that moving a magnetic field across a wire will generate an electromotive force (EMF), or voltage, along the wire. When this wire is connected in a closed electrical circuit, an electric current, capable of performing work, is driven through this closed circuit by the induced electromotive force.
It has also long been known that this resulting electric current causes the closed circuit to become encircled with a secondary, induced magnetic field, whose polarity opposes the primary magnetic field which first induced the EMF. this magnetic opposition creates mutual repulsion as a moving magnet approaches such a closed circuit, and a mutual attraction as that moving magnet moves away from the closed circuit. Both these actions tend to slow or cause “drag” on the progress of the moving magnet, causing the electric generator to act as a magnetic brake, whose effect is in direct proportion to the amount of electric current produced.
Historically, gas engines, hydroelectric dams and steam-fed turbines have been used to overcome this magnetic braking action which occurs within mechanical generators. A large amount of mechanical power is required to produce a large amount of electrical power, since the magnetic braking is generally proportional to the amount of electrical power being generated. There has long been felt the need for a generator which reduces or eliminates the well-known magnetic braking interaction, while nevertheless generating useful electric power.
The need for convenient, economical and powerful sources of renewable energy remains urgent.
When the magnetic fields within a generator are caused to move and interact by means other than applied mechanical force, electric power can be supplied without the necessity of consuming limited natural resources, thus with far greater economy.
Summary of the Invention It has long been known that the source of the magnetism within a permanent magnet is a spinning electric current within ferromagnetic atoms of certain elements, persisting indefinitely in accord with well-defined quantum rules.
This atomic current encircles every atom, thereby causing each atom to emit a magnetic field, as a miniature electromagnet. This atomic current does not exist in magnets alone. It also exists in ordinary metallic iron, and in any element or metallic alloy which can be “magnetised”, that is, any material which exhibits ferromagnetism.
All ferromagnetic atoms and “magnetic metals” contain such quantum atomic electromagnets.
In specific ferromagnetic materials, the orientation axis of each atomic electromagnet is flexible.
The orientation of magnetic flux both internal and external to the material, pivots easily.
Such materials are referred to as magnetically “soft”, due to this magnetic flexibility.
Permanent magnet materials are magnetically “hard”.
The orientation axis of each is fixed in place within a rigid crystal structure. The total magnetic field produced by these atoms cannot easily move.
This constraint aligns the field of ordinary magnets permanently, hence the name “permanent”.
The axis of circular current flow in one ferromagnetic atom can direct the axis of magnetism within another ferromagnetic atom, through a process known as “spin exchange”. This gives a soft magnetic material, like raw iron, the useful ability to aim, focus and redirect the magnetic field emitted from a magnetically hard permanent magnet. In the present invention, a permanent magnet’s rigid field is sent into a magnetically flexible “soft” magnetic material. the permanent magnet’s apparent location, observed from points within the magnetically soft material, will effectively move, vibrate, and appear to shift position when the magnetisation of the soft magnetic material is modulated by ancillary means (much like the sun, viewed while underwater, appears to move when the water is agitated). By this mechanism, the motion required for generation of electricity can be synthesised within a soft magnetic material, without requiring physical movement or an applied mechanical force.
The present invention synthesises the virtual motion of magnets and their magnetic fields, without the need for mechanical action or moving parts, to produce the electrical generator described here.
The present invention describes an electrical generator where magnetic braking known as expressions of
Lenz’s Law, do not oppose the means by which the magnetic field energy is caused to move.
The synthesised magnetic motion is produced without either mechanical or electrical resistance.
This synthesised magnetic motion is aided by forces generated in accordance with Lenz’s Law, in order to produce acceleration of the synthesised magnetic motion, instead of physical “magnetic braking” common to mechanically-actuated electrical generators.
Because of this novel magnetic interaction, the solid-state static generator of the present invention is a robust generator, requiring only a small electric force of operate.
Brief Description of the Drawings The appended drawings illustrate only typical embodiments of this invention and are therefore not to be considered limiting of its scope, as the invention encompasses
other equally effective embodiments. Fig.1 is an exploded view of the generator of this invention.
Fig.2 is a cross-sectional elevation of the generator of this invention.
Fig.3 is a schematic diagram of the magnetic action occurring within the generator of Fig.1 and Fig.2.
Fig.4 is a circuit diagram, illustrating one method of operating the electrical generator of this invention. Detailed Description of the Invention Fig.1 depicts a partially exploded view of an embodiment of an electrical generator of this invention. The part numbers also apply in Fig.2 and Fig.3. Numeral 1 represents a permanent magnet with it’s North pole pointing inward towards the soft ferromagnetic core of the device. Similarly, numeral 2 indicates permanent magnets (preferably of the same size, shape and composition), with their South poles aimed inward towards the opposite side, or opposite surface of the device. The letters “S” and “N” denote these magnetic poles in the drawings. Other magnetic polarities and configurations may be used with success; the pattern shown merely illustrates one efficient method of adding magnets to the core.
The magnets may be formed of any polarised magnetic material. In order of descending effectiveness, the most desirable permanent magnet materials are Neodymium-Iron-Boron (“NIB”), Samarium Cobalt, AlNiCo alloy, or “ceramic” Strontium-Barium or Lead-Ferrite.
A primary factor determining permanent magnet material composition is the magnetic flux strength of the particular material type. In an embodiment of the invention, these magnets may also be substituted with one or more electromagnets producing the required magnetic flux. In another embodiment of the invention, a superimposed DC current bias can be applied to the output wire to generate the required magnetic flux, replacing or augmenting the permanent magnets.
Numeral 3 indicates the magnetic core.
This core is a critical component of the generator.
The core determines the output power capacity, the optimum magnet type, the electrical impedance and the operating frequency range. the core may be any shape, composed of any ferromagnetic material, formed by any process (sintering, casting, adhesive bonding, tape-winding, etc.).
A wide range of shapes, materials
and processes is known in the art of making magnetic cores. Effective common materials include amorphous metal alloys (such as sold under the “Metglas” trademark by Metglas Inc., Conway, S.C.), nanocrystalline alloys, manganese and zinc ferrites as well as ferrites of any suitable element including any combination of magnetically “hard” and “soft” ferrites, powdered metals and ferromagnetic alloys, laminations of cobalt and/or iron and silicon-iron “electrical steel”.
This invention successfully utilises any ferromagnetic material, while functioning as claimed.
In an embodiment of the invention, and for the purpose of illustration, a circular “toroid” core is illustrated. In an embodiment of the invention, the composition may be bonded iron powder, commonly available from many manufacturers. regardless of core type, the core is prepared with holes, through which, wires may pass. the holes are drilled or formed to penetrate the core’s ferromagnetic volume.
The toroidal core 3 shown, includes radial holes pointing towards a common centre. If, for example, stiff wire rods were to be inserted through each of these holes, these rods would meet at the centre point of the core, producing an appearance similar to a spoked wheel. If a square or rectangular core (not illustrated) is used, then these holes are preferably oriented parallel to the core’s flat sides, causing stiff rods passed through the holes to form a square grid pattern, as the rods cross each other in the interior “window” area framed by the core.
While in other embodiments of the invention, these holes may take any possible orientation or patterns of orientation, a simple row of radial holes is illustrated as one example.
Numeral 4 depicts a wire, or bundle of wires which pick up and carry the output power of the generator.
Typically, this wire is composed of insulated copper, though other materials such as aluminium, iron, dielectric material, polymers and semiconducting materials may be substituted.
It may be seen in Fig.1 and Fig.2, that wire 4 passes alternately through neighbouring holes formed in core 3.
The path taken by wire 4 undulates as it passes in opposite direction through each adjacent hole.
If an even number of holes is used, the wire will emerge on the same side of the core on which it first entered. Once all the holes are filled, the resulting pair of trailing leads may be twisted together or similarly terminated, forming the output terminals of the generator shown at numeral 5.
Output wire 4, may also make multiple passes through each hole in the core. though the winding pattern is not necessarily undulatory, this basic form is shown as an example.
Many effective connection styles exist. This illustration shows the most simple.
Numeral 6 in Fig.1, Fig.2 and Fig.3, points to a partial illustration of the input winding,
or inductive coil used to shift the fields of the permanent magnets, within the core. Typically, this wire coil encircles the core, wrapping around it. For the toroidal core shown, input coil 6 resembles the outer windings of a typical toroidal inductor – a common electrical component. For the sake of clarity, only a few turns of coil 6 are shown in each of Fig.1, Fig.2 and Fig.3.
In practice, this coil may cover the entire core, or specific sections of the core, including, or not including the magnets.
Fig.2 shows the same electrical generator of Fig.1, looking transparently “down” through it from above, so that the relative positions of the core holes (shown as dotted lines), the path of the output wire 4, and the position of the magnets (white hatched areas for magnets under the core and green hatched areas for magnets above the core) are made clear. The few representative turns of the input coil 6 are shown in red in Fig.2. The generator illustrated, uses a core with 8 radially drilled holes. The spacing between these holes is equal. As shown, each hole is displaced by 45 degrees from each of it’s adjoining holes.
The centres of all of the holes lie on a common plane lying half-way down the vertical thickness of the core.
Cores of any shape or size may have as few as two or as many as hundreds of holes and a similar number of magnets.
Other variations exist, such as generators with multiple rows of holes, zigzag and diagonal patterns, or output wire 4 moulded directly into the core material.
In any case, the basic magnetic interaction shown in Fig.3 occurs for each hole in the core as described below.
Fig.3 shows the same design, viewed from the side. The curvature of the core is shown flattened on the page for the purpose of illustration. The magnets are represented schematically, protruding from the top and bottom of the core, and including arrows indicating the direction of magnetic flux (the arrow heads point to the magnet’s North pole). In practice, the free, unattached polar ends of the generator’s magnets may be left “as-is” in open air, or they may be provided with a common ferromagnetic path linking the unattached North and South poles together as a magnetic “ground”. The common return path is typically made of steel, iron or similar material, taking the form of a ferrous enclosure housing the device.
It may serve the additional purpose of a protecting chassis. The magnetic return may also be another
ferromagnetic core of a similar electric generator stacked on top of the illustrated generator.
There can be a stack of generators, sharing common magnets between the generator cores.
Any such additions are without direct bearing on the functional principle of the generator itself, and have therefore been omitted from these illustrations. Two example flux diagrams are shown in Fig.3.
Each example is shown in a space between schematically depicted partial input coils 6.
A positive or negative polarity marker indicates the direction of input current, applied through the input coil.
This applied current produces “modulating” magnetic flux, which is used to synthesise apparent motion of the permanent magnets, and is shown as a double-tailed horizontal arrow (a) along the core 3.
Each example shows this double-tailed arrow (a) pointing to the right or to the left, depending on the polarity of the applied current. In either case, vertical flux entering the core (b,3) from the external
permanent magnets (1,2) is swept along within the core, in the direction of the double-tailed arrow (a), representing the magnetic flux of the input coil.
These curved arrows (b) in the space between the magnets and the holes, can be seen to shift or bend (a –> b), as if they were streams or jets of air subject to a changing wind. The resulting sweeping motion
of the fields of the permanent magnets, causes their flux (b) to brush back and forth over the holes and wire 4 which passes through these holes.
Just as in a mechanical generator, when the magnetic flux brushes or “cuts” sideways across a conductor in this way, voltage is induced in the conductor. If an electrical load is connected across the ends of this
wire conductor (numeral 5 in Fig.1 and Fig.2), a current flows through the load via this closed circuit, delivering electrical power able to perform work.
Input of an alternating current across the input coil 6, generates an alternating magnetic field (a) causing the fields of permanent magnets 1 and 2 to shift (b) within the core 3, inducing electrical power through a load (attached to terminals 5), as if the fixed magnets (1,2) themselves were physically moving.
However, no mechanical motion is present. In a mechanical generator, induced current powering an electrical load, returns through output wire 4, creating a secondary induced magnetic field, exerting forces which substantially oppose the original magnetic field inducing the original EMF. Since load currents induce their own, secondary magnetic fields opposing the original act of induction in this way, the source of the original induction requires additional energy to restore itself and continue generating electricity.
In mechanical generators, the energy-inducing motion of the generator’s magnetic fields is being physically actuated, requiring a strong prime mover (such as a steam turbine) to restore the EMF-generating magnetic fields’ motion against the braking effect of the output-induced magnetic fields (the induced field c and the inducing field b), destructively in mutual opposition, which must ultimately be overcome by physical force, which is commonly produced by the consumption of other energy resources.
The electrical generator of the present invention is not actuated by mechanical force. It makes use of the induced secondary magnetic field in such a way as to not cause opposition, but instead, addition and resulting acceleration of magnetic field motion.
Because the present invention is not mechanically actuated, and because the magnetic fields do not act to destroy one another in mutual opposition, the present invention does not require the consumption of natural resources in order to generate electricity.
The present generator’s induced magnetic field, resulting from electrical current flowing through the load and returning through output wire 4, is that of a closed loop encircling each hole in the core.
The induced magnetic fields create magnetic flux in the form of closed loops within the ferromagnetic core.
The magnetic field “encircles” each hole in the core which carries output wire 4.
This is similar to the threads of a screw “encircling” the shaft of the screw. Within this generator, the magnetic field from output wire 4 immediately encircles each hole formed in the core (c).
since wire 4 may take an opposing direction through each neighbouring hole, the direction of the resulting magnetic field will likewise be opposite.
The direction of arrows (b) and (c) are, at each hole, opposing, headed in opposite directions, since (b) is the inducing flux and (c) is the induced flux, each opposing one another while generating electricity.
However, this magnetic opposition is effectively directed against the permanent magnets which are injecting their flux into the core, but not the source of the alternating magnetic input field 6.
In the present solid-state generator, induced output flux (4,c) is directed to oppose the permanent magnets (1,2) not the input flux source (6, a) which is synthesising the virtual motion of those magnets (1,2) by it’s magnetising action on core 3. The present generator employs magnets as the source of motive pressure driving the generator, since they are the entity being opposed or “pushed against” by the opposing reaction induced by output current which is powering a load. Experiments show that high-quality permanent magnets can be magnetically “pushed against” in this way for very long periods of time, before becoming demagnetised or “spent”.
Fig.3 illustrates inducing representative flux arrows (b) directed oppositely against induced representative flux (c). In materials typically used to form core 3, fields flowing in mutually opposite directions tend to cancel each other, just as positive and negative numbers of equal magnitude sum to zero. On the remaining side of each hole, opposite the permanent magnet, no mutual opposition takes place. Induced flux (c) caused by the generator load current remains present; however, inducing flux from the permanent magnets (b) is not present since no magnet is present, on this side, to provide the necessary flux.
This leaves the induced flux (c) encircling the hole, as well as input flux (a) from the input coils 6, continuing its path along the core, on either side of each hole.
On the side of each hole in the core where a magnet is present, action (b) and reaction (c) magnetic flux substantially cancel each other, being directed in opposite directions within the core. On the other side of each hole, where no magnet is present, input flux (a) and reaction flux (c) share a common direction.
Magnetic flux adds together in these zones, where induced magnetic flux (c) aids the input flux (a).
This is the reverse of typical generator action, where induced flux (c) is typically opposing the “input” flux originating the induction. Since the magnetic interaction is a combination of magnetic flux opposition and magnetic flux acceleration, there is no longer an overall magnetic braking or total opposition effect. The braking and opposition is counterbalanced by a simultaneous magnetic acceleration within the core. Since mechanical motion is absent, the equivalent electrical effect ranges from idling, or absence of opposition, to a strengthening and overall acceleration of the electrical input signal (within coils 6).
Proper selection of the permanent magnet (1,2) material and flux density, core 3 material magnetic
characteristics, core hole pattern and spacing, and output medium connection technique, create embodiments where the present generator will display an absence of electrical loading at the input and/or an overall amplification of the input signal.
this ultimately causes less input energy to be required in order to work the generator.
Therefore, as increasing amounts of energy are withdrawn from the generator as output power performing useful work, decreasing amounts of energy are generally required to operate it.
This process continues, working against the permanent magnets (1,2) until they are demagnetised.
In an embodiment of this invention, Fig.4 illustrates a typical operating circuit employing the generator of this invention. A square-wave input signal from a transistor switching circuit, is applied at the input terminals (S), to the primary (a) of a step-down transformer 11. The secondary winding (b) of the input transformer may be a single turn, in series with a capacitor 12 and the generator 13 input coil (c), forming a series resonant circuit.
The frequency of the applied square wave (S) must either match, or be an integral sub-harmonic of the
resonant frequency of this 3-element transformer-capacitor-inductor input circuit. Generator 13 output winding (d) is connected to resistive load L through switch 14. When switch 14 is closed, generated power
is dissipated at L, which is any resistive load, for example, and incandescent lamp or resistive heater.
Once input resonance is achieved, and the square-wave frequency applied at S is such that the combined reactive impedance of total inductance (b + c) is equal in magnitude to the opposing reactive impedance of capacitance 12, the electrical phases of current through, and voltage across, generator 13 input coil (c) will flow 90 degrees apart in resonant quadrature.
Power drawn from the square-wave input energy source applied to S will now be at a minimum. In this
condition, the resonant energy present at the generator input may be measured by connecting a voltage probe across the test points (v), situated across the generator input coil, together with a current probe around point (I), situated in series with the generator input coil
(c). The instantaneous vector product of these two measurements indicates the energy circulating at the generator’s input, ultimately shifting the permanent magnets’ fields in order to create useful induction.
This situation persists until the magnets are no longer magnetised. It will be apparent to those skilled in the art that a square (or other) wave may be applied directly to the generator input terminals (c) without the use of other components.
While this remains effective, advantageous re-generating effects may not be realised to their fullest extent with such direct excitation. Use of a resonant circuit, particularly with inclusion of a capacitor 12 as
suggested, facilitates recirculation of energy within the input circuit, generally producing efficient excitation and a reduction of the required input power as loads are applied.
Charles Flynn The technique of applying magnetic variations to the magnetic flux produced by a permanent magnet is covered in detail in
the patents of Charles Flynn which are shown in the “PatD20” document in this set.
In his patent he shows techniques for producing linear motion, reciprocal motion, circular motion and power conversion, and he gives a considerable amount of description and explanation on each, his main patent containing a hundred illustrations. Taking one application at random: He states that a substantial enhancement of magnetic flux can be obtained from the use of an arrangement like this: Here, a laminated
soft iron frame has a powerful permanent magnet positioned in it’s centre and six coils are wound in the positions shown. The magnetic flux from the permanent magnet flows around both sides of the frame.
10000 BC Crimea, before the deluge or big flood. Breaking-up or destruction of planet Tiamat and is now our asteroid belt.
The hidden pyramids of Crimea
by ELLA STER on 21 MARCH 2022 2 COMMENTS
In 1999, scientist Vitaly Gokh discovered a unique complex of seven underground pyramids in Crimea. Later, his team discovered dozens of other pyramids, partly underground and above ground, that were built according to a fixed structure. Under one pyramid they also found a sphinx. The pyramids turn out to be of special historical value.
Vitaly Gokh was doing research at this site to find underground water sources when he discovered the pyramids. Because the area of Sevastopol was known for its poor water supply, he developed an instrument to search for underground drinking water. As a former engineer, he was well acquainted with instruments that use magnetic resonance and had built a device himself.
Vitaly Gokh
As early as the summer of 1999, his instrument had uncovered an underground anomaly on the outskirts of Sevastopol, southwestern Crimea. They found an opening there that led down. After further digging, several limestone blocks were found. When it turned out that these had regular dimensions of approximately 1.5 by 2.5 meters, it was assumed that they were made by man. After analyzing an area of thirty meters, the team realized that they had discovered a pyramid.
The problem was: the pyramid was underground. However, Vitaly Gokh was also able to perform vertical measurements with improved instruments and was also able to confirm the square structure of the pyramid. Each side was 72 meters long, the height was about 45-52 meters, with the top almost at ground level.
Above-ground pyramids disappeared due to floods underground
Excavation work also revealed that the surrounding layers showed signs that the pyramid had originally been above ground, but that flooding had caused the area to be flooded. These floods had also brought clay and other silt.
The pyramids of Crimea are arranged in a certain order and aligned with each other.
Later, a whole chain of pyramidal structures was discovered in the region, the height of which varies from 36 to 62 meters. These had remained hidden from scientists and the local inhabitants for a long time, because they were completely underground. The tops of the pyramids are located only a few meters from the earth’s surface. The estimated age of the structures is said to be 7-10 thousand years.
A total of 37 pyramids have been discovered in Crimea, some of which have a three-sided shape, unlike the four-sided Egyptian pyramids. The special structure of the locations of the pyramids in crimea, is well mapped. In the vicinity of the village of Krasny Mak is a central 56 meter high pyramid. This is surrounded by several chains of pyramids. To the east of it is a smaller structure with also a pyramid in the middle.
In the rock of mountain fortress of Balaklava you can clearly see a pyramid shape. From the western Kozacha bay of Sevastopol runs a pyramid chain to Balaklava in the southeast.
The scientists who discovered these pyramids met with considerable resistance from the ukrainian authorities at the time. Vitaly Goh was the first to bring out the discovery of the pyramids in crimea.
Certificate of the Scientific Discovery of the Crimean Pyramids by a group of scientists led by Vitaly Gokh, issued on October 24, 1999 by the International Academy of Energy Information Sciences (international non-governmental, public creative, self-governing and self-funding higher scientific institution).
Pyramidal structures in the landscape of Krasny Mak, east of Sevastopol.
Similarities with Egyptian pyramids
A few years later, another unique pyramidal complex was discovered in the mountainous Crimea that, unlike the underground pyramids, is located in the rock. These differ in shape from the previously discovered pyramids: they have a rounded shape with a truncated top. This makes them look like one of the oldest and most mysterious pyramids in Egypt, the pyramid of Djoser.
The pyramids on the southwest coast of Crimea, near the city of Sudak
Of all the pyramids found in Crimea, the pyramid in the Ai-Petri region is recognized as the largest. A statue of a sphinx was also found under one of them, and it “looks” — unlike the Egyptian sphinx — to the west. After a comparative analysis of the opening of the pyramid of Giza and the pyramid of crimea, it turned out to everyone’s great surprise that both pyramids were made of the same material.
The sphinx is built into the underground pyramid. At the top of the pyramid there are 3 ventilation shafts. In the head of the sphinx is a ‘camera’ that is also connected to ventilation shafts.
Energy resonators
The Crimean Peninsula contains many unsolved mysteries. The pyramids are one of them. The historical value of the pyramids lies in their deep content of powerful energy, which they accumulate through the geometry of shapes. Created fields within these objects make it possible to neutralize negative energy and convert it into positive energy. The question is: who made these energy converters and for what purpose?
The suspicion is that the pyramids are double like an octahedron, which is a regular octahedron, a spatial figure bounded by eight equilateral triangles. From the base of the pyramids, crystal lattices of similar pyramids have been built at the bottom. These have the tops facing down, which provides a connection to the earth’s core.
The scheme of the pyramids’ energy interaction with the stars and with the earth’s core, proposed by a group of scientists led by Vitaly Gokh.
The scientists led by Vitaly Gokh think that the pyramids of Crimea thus maintain the earth’s energy balance. The radiation from the edges of the pyramids affects the state of our planet’s tectonic plates and transmits this energy to space, using special subtle (torsion) energies.
In addition, the honeycomb structure plays a role, which is characteristic of the Crimean pyramids. The edges — with equal gaps in strict order — are interspersed with oval structures. These are energy information capsules, the internal cavities of which are filled with compressed carbon dioxide (CO2), so that the entire structure resembles a crystal lattice. As a result, the honeycomb edges of the pyramids act as energy resonators, a kind of antenna emitter, which transmit energy information.
According to Gokh, these pyramids were part of a global system, where they were used to receive and transmute cosmic energy and then spread it across the planet. He thinks the pyramids were scientific tools to control and stabilize the land masses of planet earth. According to him, the construction of this system would be about 16,000 years old, or date from 14,000 BC.
Despite these extraordinary archaeological discoveries, which moreover do not fit into the official narrative of the history of human civilization, little attention has been paid to the hidden pyramids in crimea. Perhaps this is just one of the country’s hidden treasures and another reason why the Republic of Crimea is of great geopolitical value.
Bronnen:
Posts of matilda-macelroy.com:
Pushing WW3, preparation, set-up and Push.
The Lithium needed to secure the EU Renewable Energy Transition?
EU in trouble again?
A Critical Analysis of All-Cause Deaths during COVID-19 Vaccination in an Italian Province
Under “corporatism”, monolithic predator corporations run around sucking up as much wealth and economic power as they possibly can.
Inversion ongoing & alien interventions?
‘1 in a billion’ chance COVID emerged from nature.
Last Step, Martial law will be introduced.
Climate change no offence mend
“We are the Borg. Resistance is futile. Your race will be assimilated and service to us.”
“A Covenant With Death”, by Bill Cooper.
The great Awakening, Plandemic 3 Video, please click on link:
The Great Awakening (Full, Unedited Movie) (rumble.com)
rumble.com/v2s0gp8-plandemic-3-the-great-awakening-full-unedited-movie.html
NATO & Russia and the introduction of official censorship in the EU.
The big ( Privat) Central Banks.
Population control attempts & history
Mind Control Techniques The fifth column,
New, Health & Bible, lifestyles!
End to Green dictate by the EU, IMF, World Banks others.
UN & NWO Monkey Virus DNA Found in COVID-19 Shots
Cheats, liars and greed our newly elected Saints.
Dissident control in China being copied by the WEST?
A conspiracy against god and man!
Humans reduced to a commodity!
Can the West still turn the tide of tyranny?
Conspiracy and the coming witch hunt.
- Pyramids in Crimea on the map. Mysteries of history
- A Crimean Pyramid?
- Ancient pyramids in the Crimea. Are Crimean “pyramids” going to be dug out? Where are the Crimean pyramids on the map
- Researcher Vitaly Goh Found An Ancient Underground Pyramid in Crimea
- Crimean pyramids. Mysterious Crimea: Goh pyramids as an example of ancient architecture
Posts of matilda-macelroy.com:
A conspiracy against god and man!
Humans reduced to a commodity!
Can the West still turn the tide of tyranny?
Conspiracy and the coming witch hunt.
humanityandearth.com links:
How they managed to capture/control the masses in The West.
Did UFO interfere with nuclear war heads?
Remote viewing, Scientology and CIA
Google at the core of the Cabal?
Mind Control using electromagnetic Frequencies.
The US government and mind reading!
Manipulation our environment/health?
The Marcabians and President Eisenhower!
Food and depopulation and still making a profit!
Censorship, the collusion between The big tech media & politics.
De-population attempts? The great food reset. The physical Universe. Antarctica and the hollow planets! Is planet Earth hell? Humanity & History! Health and Ageing! Mind control, US destruction from inside out! Africa, Marduk’s Bluff? & Alien response & Putin. The Biofield and low frequent EM field/waves. Liberalism now lost? Dulce, New Mexico, whistle-blower rapport by Thomas Edwin Castello. Numbers 3, 7, 9,11,13, 33, 39.and the Free- Masons & illuminati. Loosh, energy generated by all organic life forms. Mad Science from Dr Mercola publication. End of the Western Democracy and liberalism. Banning Early Treatment Was a Crime Against Humanity? Messing with vaccinations? Big Data, Transhumanism & Why the Singularity May Be Faked. Skull and Bones Society & Thule society! UFO & CIA By Ron Hubbard, Founder. Messing with our food? Power & greed, pushing for the economic collapse or great reset. Forcing the New Dystopian future. History of the human build UFO’s Humanity being sold like cattle, agenda 21 UN. EU Central bank, pushing for Digital currency. Fake Meat & Junk Food Pushing for a nuclear war?
2,477 responses to “The climate debate!”
[…] Visit: Free energy and climate change. […]
Top ,.. top top … post! Keep the good work on !
[…] The climate debate! […]
Top site ,.. amazaing post ! Just keep the work on !
[…] The climate debate! […]
I don’t even understand how I stopped up here, but I thought this put up was once great. I don’t recognise who you are however certainly you are going to a well-known blogger in the event you aren’t already. Cheers!|
Hi there Dear, are you truly visiting this web page daily, if so then you will definitely take fastidious knowledge.|
This information is worth everyone’s attention. Where can I find out more?|
Hello There. I found your blog using msn. This is a very well written article. I will make sure to bookmark it and return to read more of your useful information. Thanks for the post. I’ll definitely return.|
Hello! I know this is somewhat off topic but I was wondering which blog platform are you using for this website? I’m getting tired of WordPress because I’ve had issues with hackers and I’m looking at options for another platform. I would be fantastic if you could point me in the direction of a good platform.|
Hey there! I know this is kind of off topic but I was wondering if you knew where I could get a captcha plugin for my comment form? I’m using the same blog platform as yours and I’m having problems finding one? Thanks a lot!|
For most up-to-date news you have to pay a visit web and on world-wide-web I found this web site as a best web page for latest updates.|
Hi my loved one! I wish to say that this post is awesome, great written and include almost all important infos. I would like to see extra posts like this .|
Hi there just wanted to give you a quick heads up and let you know a few of the pictures aren’t loading properly. I’m not sure why but I think its a linking issue. I’ve tried it in two different browsers and both show the same results.|
[…] The climate debate! […]
What抯 Happening i am new to this, I stumbled upon this I’ve found It absolutely helpful and it has aided me out loads. I hope to contribute & assist other users like its helped me. Great job.
I have learned some new things from a blog post. Yet another thing to I have seen is that in many instances, FSBO sellers will certainly reject an individual. Remember, they’d prefer not to use your providers. But if a person maintain a gradual, professional connection, offering support and staying in contact for four to five weeks, you will usually be capable of win interviews. From there, a house listing follows. Cheers
My brother recommended I might like this website. He was entirely right. This post truly made my day. You cann’t imagine simply how much time I had spent for this information! Thanks!|
Simply want to say your article is as amazing. The clarity in your post is just spectacular and i can assume you’re an expert on this subject. Fine with your permission let me to grab your RSS feed to keep up to date with forthcoming post. Thanks a million and please keep up the rewarding work.|
I pay a visit everyday a few sites and sites to read articles or reviews, but this webpage provides feature based writing.|
I do believe all of the concepts you have introduced for your post. They’re very convincing and will certainly work. Nonetheless, the posts are very quick for beginners. May just you please prolong them a bit from next time? Thanks for the post.|
I really love your blog.. Great colors & theme. Did you develop this site yourself? Please reply back as I’m looking to create my own personal site and would love to learn where you got this from or exactly what the theme is named. Appreciate it!|
This is a great tip especially to those fresh to the blogosphere. Brief but very precise info… Many thanks for sharing this one. A must read article!|
I would like to thank you for the efforts you have put in penning this website. I really hope to view the same high-grade blog posts from you later on as well. In fact, your creative writing abilities has encouraged me to get my very own site now ;)|
Outstanding quest there. What occurred after? Good luck!|
We’re a group of volunteers and starting a brand new scheme in our community. Your web site offered us with useful information to paintings on. You’ve done a formidable task and our whole community will probably be thankful to you.
It’s the best time to make some plans for the future and it is time to be happy. I’ve read this post and if I could I want to suggest you some interesting things or suggestions. Perhaps you could write next articles referring to this article. I wish to read even more things about it!
Wonderful blog! I found it while searching on Yahoo News. Do you have any suggestions on how to get listed in Yahoo News? I’ve been trying for a while but I never seem to get there! Cheers
Hello there, just was aware of your weblog via Google, and found that it’s truly informative. I抦 gonna watch out for brussels. I will appreciate in the event you proceed this in future. Numerous other folks will likely be benefited out of your writing. Cheers!
Wow, wonderful weblog structure! How long have you been blogging for? you make blogging glance easy. The full glance of your web site is excellent, let alone the content!
Please let me know if you’re looking for a article author for your weblog. You have some really great articles and I think I would be a good asset. If you ever want to take some of the load off, I’d absolutely love to write some material for your blog in exchange for a link back to mine. Please send me an email if interested. Thank you!|
Hi there, You have done a great job. I’ll certainly digg it and personally suggest to my friends. I’m confident they’ll be benefited from this site.|
Helpful info. Lucky me I discovered your site by chance, and I’m stunned why this twist of fate did not came about earlier! I bookmarked it.|
Hey are using WordPress for your blog platform? I’m new to the blog world but I’m trying to get started and create my own. Do you need any html coding expertise to make your own blog? Any help would be greatly appreciated!|
The other day, while I was at work, my sister stole my iphone and tested to see if it can survive a twenty five foot drop, just so she can be a youtube sensation. My iPad is now destroyed and she has 83 views. I know this is totally off topic but I had to share it with someone!|
Hiya very nice web site!! Man .. Beautiful .. Superb .. I will bookmark your web site and take the feeds also? I’m glad to search out so many helpful info here in the publish, we want work out more strategies on this regard, thanks for sharing. . . . . .|
[…] The climate debate! […]
Somebody essentially help to make seriously articles I would state. This is the first time I frequented your web page and thus far? I surprised with the research you made to create this particular publish amazing. Wonderful job!
Great post. I was checking continuously this blog and I’m impressed! Extremely helpful information specifically the last part 🙂 I care for such info much. I was looking for this particular information for a very long time. Thank you and good luck.
Hey very cool website!! Man .. Excellent .. Amazing .. I will bookmark your website and take the feeds also厈I am happy to find so many useful information here in the post, we need work out more techniques in this regard, thanks for sharing. . . . . .
Good site! I really love how it is easy on my eyes and the data are well written. I am wondering how I could be notified whenever a new post has been made. I’ve subscribed to your RSS feed which must do the trick! Have a nice day!
It’s a pity you don’t have a donate button! I’d definitely donate to this superb blog! I guess for now i’ll settle for bookmarking and adding your RSS feed to my Google account. I look forward to brand new updates and will share this site with my Facebook group. Talk soon!
Wow, marvelous blog layout! How long have you been blogging for? you make blogging look easy. The overall look of your site is wonderful, let alone the content!|
Nice blog! Is your theme custom made or did you download it from somewhere? A theme like yours with a few simple adjustements would really make my blog jump out. Please let me know where you got your design. Thanks a lot
Hello there! Do you know if they make any plugins to help with SEO? I’m trying to get my blog to rank for some targeted keywords but I’m not seeing very good results. If you know of any please share. Thanks!
A further issue is that video gaming became one of the all-time biggest forms of fun for people of nearly every age. Kids participate in video games, plus adults do, too. Your XBox 360 is amongst the favorite video games systems for many who love to have a huge variety of games available to them, and who like to play live with some others all over the world. Many thanks for sharing your opinions.
Hello, i think that i saw you visited my site thus i came to 搑eturn the favor?I’m attempting to find things to improve my website!I suppose its ok to use some of your ideas!!
Super-Duper site! I am loving it!! Will be back later to read some more. I am taking your feeds also.
As I web site possessor I believe the content matter here is rattling wonderful , appreciate it for your hard work. You should keep it up forever! Best of luck.
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
For some time now, people have had RFID microchips implanted in their hand that is able to store all of their information in them, including their bank account; and it is outstanding how accurate the Bible is concerning this microchip.
You can read more about it here–also to understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
For some time now, people have had RFID microchips implanted in their hand that is able to store all of their information in them, including their bank account; and it is outstanding how accurate the Bible is concerning this microchip.
You can read more about it here–also to understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
For some time now, people have had RFID microchips implanted in their hand that is able to store all of their information in them, including their bank account; and it is outstanding how accurate the Bible is concerning this microchip.
You can read more about it here–also to understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
I have noticed that online diploma is getting well-known because getting your degree online has turned into a popular selection for many people. A huge number of people have definitely not had an opportunity to attend a regular college or university nevertheless seek the raised earning possibilities and career advancement that a Bachelor’s Degree offers. Still some others might have a degree in one training but wish to pursue another thing they now have an interest in.
Thanks for your information on this blog. One particular thing I would like to say is that often purchasing electronic devices items from the Internet is not new. The truth is, in the past 10 years alone, the market for online electronics has grown considerably. Today, you could find practically any type of electronic system and tools on the Internet, ranging from cameras along with camcorders to computer pieces and video games consoles.
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
This is where it really starts to come together. It is shocking how accurate the Bible is concerning the implatnable RFID microchip. These are notes from a man named Carl Sanders who worked with a team of engineers to help develop this RFID chip
“Carl Sanders sat in seventeen New World Order meetings with heads-of-state officials such as Henry Kissinger and Bob Gates of the C.I.A. to discuss plans on how to bring about this one-world system. The government commissioned Carl Sanders to design a microchip for identifying and controlling the peoples of the world—a microchip that could be inserted under the skin with a hypodermic needle (a quick, convenient method that would be gradually accepted by society).
Carl Sanders, with a team of engineers behind him, with U.S. grant monies supplied by tax dollars, took on this project and designed a microchip that is powered by a lithium battery, rechargeable through the temperature changes in our skin. Without the knowledge of the Bible (Brother Sanders was not a Christian at the time), these engineers spent one-and-a-half-million dollars doing research on the best and most convenient place to have the microchip inserted.
Guess what? These researchers found that the forehead and the back of the hand (the two places the Bible says the mark will go) are not just the most convenient places, but are also the only viable places for rapid, consistent temperature changes in the skin to recharge the lithium battery. The microchip is approximately seven millimeters in length, .75 millimeters in diameter, about the size of a grain of rice. It is capable of storing pages upon pages of information about you. All your general history, work history, crime record, health history, and financial data can be stored on this chip.
Brother Sanders believes that this microchip, which he regretfully helped design, is the “mark” spoken about in Revelation 13:16–18. The original Greek word for “mark” is “charagma,” which means a “scratch or etching.” It is also interesting to note that the number 666 is actually a word in the original Greek. The word is “chi xi stigma,” with the last part, “stigma,” also meaning “to stick or prick.” Carl believes this is referring to a hypodermic needle when they poke into the skin to inject the microchip.”
Mr. Sanders asked a doctor what would happen if the lithium contained within the RFID microchip leaked into the body. The doctor replied by saying a terrible sore would appear in that location. This is what the book of Revelation says:
“And the first (angel) went, and poured out his vial on the earth; and there fell a noisome and grievous sore on the men which had the mark of the beast, and on them which worshipped his image” (Revelation 16:2).
You can read more about it here–and to also understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
Let me just get straight to the point; I saw your blog and I think you would be a great fit for our company :-). We are currently paying upwards of $70/hour for English translators. We are looking for people who are reliable, hardworking, and willing to work long-term. English fluency is preferred, and I don’t think you should have any problems with this requirement. We are an online based company from North Carolina. Interested? Apply here: https://msha.ke/freedomwithtay
Top site ,.. i will save for later !
Hi, I hope you’re well. I’m reaching out because I think you’d be interested in a software called Jasper AI. It’s a robotic writer powered by AI technologies that can curate content 5x quicker than a typical human copywriter. With Jasper AI, you obtain 100 original content with zero plagiarism flags that are accurately written. You also get pre-written templates on particular categories. Jasper AI writes SEO-friendly content, which means all the content that you get by using Jasper AI is optimized and ready to attract sales. You are able to try it out for free here: Jasper AI Bot. I’d really love to hear your thoughts as soon as you have tested it out.
I couldn’t disagree more- except I should!1!1! LOL
you’ve a terrific weblog here! would you like to make some invite posts on my weblog?
Are you okay? I’m worried about you. Please be good to you.
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
This is where it really starts to come together. It is shocking how accurate the Bible is concerning the implatnable RFID microchip. These are notes from a man named Carl Sanders who worked with a team of engineers to help develop this RFID chip
“Carl Sanders sat in seventeen New World Order meetings with heads-of-state officials such as Henry Kissinger and Bob Gates of the C.I.A. to discuss plans on how to bring about this one-world system. The government commissioned Carl Sanders to design a microchip for identifying and controlling the peoples of the world—a microchip that could be inserted under the skin with a hypodermic needle (a quick, convenient method that would be gradually accepted by society).
Carl Sanders, with a team of engineers behind him, with U.S. grant monies supplied by tax dollars, took on this project and designed a microchip that is powered by a lithium battery, rechargeable through the temperature changes in our skin. Without the knowledge of the Bible (Brother Sanders was not a Christian at the time), these engineers spent one-and-a-half-million dollars doing research on the best and most convenient place to have the microchip inserted.
Guess what? These researchers found that the forehead and the back of the hand (the two places the Bible says the mark will go) are not just the most convenient places, but are also the only viable places for rapid, consistent temperature changes in the skin to recharge the lithium battery. The microchip is approximately seven millimeters in length, .75 millimeters in diameter, about the size of a grain of rice. It is capable of storing pages upon pages of information about you. All your general history, work history, crime record, health history, and financial data can be stored on this chip.
Brother Sanders believes that this microchip, which he regretfully helped design, is the “mark” spoken about in Revelation 13:16–18. The original Greek word for “mark” is “charagma,” which means a “scratch or etching.” It is also interesting to note that the number 666 is actually a word in the original Greek. The word is “chi xi stigma,” with the last part, “stigma,” also meaning “to stick or prick.” Carl believes this is referring to a hypodermic needle when they poke into the skin to inject the microchip.”
Mr. Sanders asked a doctor what would happen if the lithium contained within the RFID microchip leaked into the body. The doctor replied by saying a terrible sore would appear in that location. This is what the book of Revelation says:
“And the first (angel) went, and poured out his vial on the earth; and there fell a noisome and grievous sore on the men which had the mark of the beast, and on them which worshipped his image” (Revelation 16:2).
You can read more about it here–and to also understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
One thing I’d like to say is the fact that before buying more laptop or computer memory, look at the machine within which it could be installed. In case the machine will be running Windows XP, for instance, the actual memory threshold is 3.25GB. Setting up in excess of this would easily constitute any waste. Make certain that one’s motherboard can handle the particular upgrade amount, as well. Great blog post.
Hi, i think that i saw you visited my blog so i came to 搑eturn the favor?I am trying to find things to improve my website!I suppose its ok to use a few of your ideas!!
I keep listening to the rumor talk about receiving free online grant applications so I have been looking around for the most excellent site to get one. Could you advise me please, where could i acquire some?
I loved as much as you will receive carried out right here. The sketch is attractive, your authored subject matter stylish. nonetheless, you command get bought an edginess over that you wish be delivering the following. unwell unquestionably come further formerly again since exactly the same nearly very often inside case you shield this increase.
Do you mind if I add to this? Your common sense should be accepted everywhere…even so..I can think of some other ideas that work with this. I hope so- thanks for reading.
I抦 no longer sure where you are getting your information, but good topic. I needs to spend a while studying more or working out more. Thank you for great info I used to be looking for this information for my mission.
I do love the way you have framed this specific difficulty plus it does indeed present us some fodder for consideration. On the other hand, because of what precisely I have personally seen, I simply wish when the remarks pack on that men and women remain on issue and don’t embark on a tirade of the news of the day. All the same, thank you for this fantastic point and though I do not agree with it in totality, I value your perspective.
Thank you, I’ve recently been looking for info approximately this topic for a long time and yours is the greatest I have found out till now. But, what about the conclusion? Are you certain concerning the supply?
I think other website proprietors should take this web site as an model, very clean and magnificent user genial style and design, as well as the content. You are an expert in this topic!
I’m just commenting to make you know of the terrific discovery our child had studying your site. She came to understand such a lot of issues, which include how it is like to have a great giving nature to get the mediocre ones effortlessly know precisely specified multifaceted topics. You undoubtedly exceeded our own expected results. Thanks for presenting the priceless, healthy, explanatory and even cool thoughts on this topic to Mary.
Hello.This post was really fascinating, especially because I was searching for thoughts on this topic last Monday.
There are some fascinating cut-off dates on this article however I don抰 know if I see all of them heart to heart. There may be some validity but I’ll take hold opinion till I look into it further. Good article , thanks and we would like extra! Added to FeedBurner as effectively
I’m really impressed with your writing skills as well as with the layout on your weblog. Is this a paid theme or did you customize it yourself? Anyway keep up the nice quality writing, it抯 rare to see a nice blog like this one these days..
Based on my research, after a in foreclosure home is marketed at a bidding, it is common with the borrower to still have some sort ofthat remaining unpaid debt on the personal loan. There are many loan merchants who try and have all costs and liens paid back by the up coming buyer. Nevertheless, depending on specific programs, polices, and state laws and regulations there may be a few loans which are not easily sorted out through the shift of financial products. Therefore, the obligation still rests on the borrower that has had his or her property foreclosed on. Thank you sharing your thinking on this blog.
Thanks for your post. I also feel that laptop computers are becoming more and more popular right now, and now are often the only type of computer included in a household. This is because at the same time actually becoming more and more inexpensive, their processing power keeps growing to the point where they can be as highly effective as desktop computers coming from just a few years ago.
Thanks for expressing your ideas. I’d also like to state that video games have been at any time evolving. Modern tools and revolutions have made it simpler to create realistic and active games. Most of these entertainment games were not as sensible when the real concept was being attempted. Just like other designs of know-how, video games also have had to evolve by many generations. This itself is testimony on the fast growth and development of video games.
One more thing. In my opinion that there are quite a few travel insurance web pages of respectable companies that allow you enter your holiday details and get you the prices. You can also purchase your international holiday insurance policy on-line by using your own credit card. Everything you should do is usually to enter the travel details and you can see the plans side-by-side. Just find the system that suits your financial budget and needs after which use your bank credit card to buy that. Travel insurance online is a good way to search for a reliable company for international holiday insurance. Thanks for expressing your ideas.
I actually apreciate that individuals are obtaining actions done to obtain independent from all the large corps that are definitly wrecking or globe and also taking our money for point that need to be cost-free for all! I enjoy to do my studies and also discovering a lot of individuals sharing their expirience and understanding on this unique subject … it just offers me hope!
you are in point of fact a good webmaster. The website loading pace is incredible. It sort of feels that you are doing any distinctive trick. In addition, The contents are masterwork. you’ve done a fantastic task in this topic!
Greetings
I have just verified your SEO on energy-from-space.com for the current search visibility and saw that your website could use a boost.
We will increase your SEO metrics and ranks organically and safely, using only whitehat methods, while providing monthly reports and outstanding support.
Please check our plans here, we offer SEO at cheap rates.
https://www.hilkom-digital.de/cheap-seo-packages/
Regards
Mike Bosworth
PS: Quality SEO content is included
Thanks a ton for your post. I’d like to comment that the price of car insurance varies from one plan to another, since there are so many different facets which give rise to the overall cost. One example is, the model and make of the motor vehicle will have a huge bearing on the price tag. A reliable older family motor vehicle will have a lower priced premium than a flashy fancy car.
Great post. I was checking constantly this blog and I am impressed! Very useful info specifically the last part 🙂 I care for such info a lot. I was seeking this certain information for a very long time. Thank you and good luck.
I know this if off topic but I’m looking into starting my own blog and was curious what all is needed to get setup? I’m assuming having a blog like yours would cost a pretty penny? I’m not very internet smart so I’m not 100 certain. Any recommendations or advice would be greatly appreciated. Kudos
Hi there
Just checked your energy-from-space.com in ahrefs and saw that you could use an authority boost.
With our service you will get a guaranteed ahrefs score within just 3 months time. This will increase the organic visibility and strengthen your website authority, thus getting it stronger against G updates as well.
For more information, please check our offers
https://www.monkeydigital.co/domain-authority-plan/
NEW: Semrush DA is now possible
https://www.monkeydigital.co/semrush-da/
Thanks and regards
Mike Dickinson
PS: For a limited time, we`ll add ahrefs UR50+ for free.
Hm,.. amazing post ,.. just keep the good work on!
Gооd dаy! energy-from-space.com
Did yоu knоw thаt it is pоssiblе tо sеnd rеquеst uttеrly lеgit?
Wе prоvidе а nеw lеgitimаtе mеthоd оf sеnding rеquеst thrоugh соntасt fоrms. Suсh fоrms аrе lосаtеd оn mаny sitеs.
Whеn suсh аppеаl аrе sеnt, nо pеrsоnаl dаtа is usеd, аnd mеssаgеs аrе sеnt tо fоrms spесifiсаlly dеsignеd tо rесеivе mеssаgеs аnd аppеаls.
аlsо, mеssаgеs sеnt thrоugh fееdbасk Fоrms dо nоt gеt intо spаm bесаusе suсh mеssаgеs аrе соnsidеrеd impоrtаnt.
Wе оffеr yоu tо tеst оur sеrviсе fоr frее. Wе will sеnd up tо 50,000 mеssаgеs fоr yоu.
Thе соst оf sеnding оnе milliоn mеssаgеs is 49 USD.
This lеttеr is сrеаtеd аutоmаtiсаlly. Plеаsе usе thе соntасt dеtаils bеlоw tо соntасt us.
Contact us.
Telegram – @FeedbackMessages
Skype live:contactform_18
WhatsApp – +375259112693
We only use chat.
no.reply.Cow@gmail.com
I love this, but even so I have a question. Do you mind answering?
Your reasons should be accepted everywhere.
Hello my friend! I want to say that this post is awesome, nice written and include almost all significant infos. I would like to see more posts like this.
I respect the logic in this article, although I would like to see further work on this from you at some point.
Hi there
I Just checked your energy-from-space.com ranks and saw that your site is trending down for some time.
If you are looking for a trend reversal, we have the right solution for you
We are offering affordable Content Marketing plans with humanly written SEO content
For more information, please check our offers
https://www.digital-x-press.com/product/content-marketing/
Thanks and regards
Mike Watson
Greetings from Carolina! I’m bored at work so I decided to check out your blog on my iphone during lunch break. I enjoy the knowledge you provide here and can’t wait to take a look when I get home. I’m surprised at how fast your blog loaded on my cell phone .. I’m not even using WIFI, just 3G .. Anyhow, great site!
I am really impressed with your writing skills and also with the layout on your weblog. Is this a paid theme or did you customize it yourself? Anyway keep up the nice quality writing, it抯 rare to see a nice blog like this one nowadays..
Hi this is kind of of off topic but I was wondering if blogs use WYSIWYG editors or if you have to manually code with HTML. I’m starting a blog soon but have no coding experience so I wanted to get guidance from someone with experience. Any help would be greatly appreciated!
Great site! I am loving it!! Will come back again. I am bookmarking your feeds also.
I have recently started a website, the information you provide on this website has helped me greatly. Thank you for all of your time & work.
Wow that was unusual. I just wrote an really long comment but after I clicked submit my comment didn’t appear. Grrrr… well I’m not writing all that over again. Anyway, just wanted to say wonderful blog!
This web site is mostly a walk-through for the entire data you wished about this and didn抰 know who to ask. Glimpse here, and you抣l positively uncover it.
I wish to express my admiration for your kindness supporting those people that really want guidance on in this concept. Your real commitment to passing the solution all over ended up being quite useful and has specifically made girls like me to reach their desired goals. Your warm and helpful suggestions indicates much a person like me and extremely more to my colleagues. Many thanks; from everyone of us.
My spouse and I absolutely love your blog and find nearly all of your post’s to be just what I’m looking for. Would you offer guest writers to write content for yourself? I wouldn’t mind creating a post or elaborating on many of the subjects you write concerning here. Again, awesome website!
One other thing I would like to say is that as opposed to trying to suit all your online degree classes on days and nights that you conclude work (considering that people are tired when they get back), try to arrange most of your classes on the week-ends and only a couple courses for weekdays, even if it means taking some time away from your weekend break. This is really good because on the week-ends, you will be more rested and concentrated in school work. Thanks a lot for the different recommendations I have discovered from your blog.
One thing I want to say is before obtaining more computer memory, look at the machine in to which it will be installed. When the machine is usually running Windows XP, for instance, the particular memory limit is 3.25GB. Using in excess of this would basically constitute just a waste. Make sure one’s motherboard can handle an upgrade quantity, as well. Interesting blog post.
Wow! Thank you! I continually needed to write on my website something like that. Can I include a fragment of your post to my site?
An attention-grabbing discussion is price comment. I believe that you should write more on this topic, it may not be a taboo subject however generally individuals are not enough to talk on such topics. To the next. Cheers
Thank you for another excellent article. Where else could anybody get that type of info in such a perfect way of writing? I have a presentation next week, and I am on the look for such info.
Hello there, I found your site via Google while searching for a related topic, your website came up, it looks great. I have bookmarked it in my google bookmarks.
Great content! Super high-quality! Keep it up!
May I request more information on the subject? All of your articles are extremely useful to me. Thank you!
Whether you believe in God or not, this is a must-read message!!!
Throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In Revelation 13:16-18, we read,
“He (the false prophet who decieves many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Referring to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate only in one place.
This is where it really starts to come together. It is shocking how accurate the Bible is concerning the implatnable RFID microchip. These are notes from a man named Carl Sanders who worked with a team of engineers to help develop this RFID chip
“Carl Sanders sat in seventeen New World Order meetings with heads-of-state officials such as Henry Kissinger and Bob Gates of the C.I.A. to discuss plans on how to bring about this one-world system. The government commissioned Carl Sanders to design a microchip for identifying and controlling the peoples of the world—a microchip that could be inserted under the skin with a hypodermic needle (a quick, convenient method that would be gradually accepted by society).
Carl Sanders, with a team of engineers behind him, with U.S. grant monies supplied by tax dollars, took on this project and designed a microchip that is powered by a lithium battery, rechargeable through the temperature changes in our skin. Without the knowledge of the Bible (Brother Sanders was not a Christian at the time), these engineers spent one-and-a-half-million dollars doing research on the best and most convenient place to have the microchip inserted.
Guess what? These researchers found that the forehead and the back of the hand (the two places the Bible says the mark will go) are not just the most convenient places, but are also the only viable places for rapid, consistent temperature changes in the skin to recharge the lithium battery. The microchip is approximately seven millimeters in length, .75 millimeters in diameter, about the size of a grain of rice. It is capable of storing pages upon pages of information about you. All your general history, work history, crime record, health history, and financial data can be stored on this chip.
Brother Sanders believes that this microchip, which he regretfully helped design, is the “mark” spoken about in Revelation 13:16–18. The original Greek word for “mark” is “charagma,” which means a “scratch or etching.” It is also interesting to note that the number 666 is actually a word in the original Greek. The word is “chi xi stigma,” with the last part, “stigma,” also meaning “to stick or prick.” Carl believes this is referring to a hypodermic needle when they poke into the skin to inject the microchip.”
Mr. Sanders asked a doctor what would happen if the lithium contained within the RFID microchip leaked into the body. The doctor replied by saying a terrible sore would appear in that location. This is what the book of Revelation says:
“And the first (angel) went, and poured out his vial on the earth; and there fell a noisome and grievous sore on the men which had the mark of the beast, and on them which worshipped his image” (Revelation 16:2).
You can read more about it here–and to also understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still in the public scene?
So what’s in the name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, And I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the word’s of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close? The same God who formed the heavens and earth that draws all people to Him through His creation, likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good that we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has put in each and every one of us, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood.
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death–now being conformed into the image of the heavenly man in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to enter the Kingdom of God–John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8).
I’d like to find out more? I’d love to find out more details.
Please tell me more about this. May I ask you a question?
I enjoyed reading your piece and it provided me with a lot of value.
Sustain the excellent work and producing in the group!
Thank you for providing me with these article examples. May I ask you a question?
Great content! Super high-quality! Keep it up!
Thank you for your help and this post. It’s been great.
Thank you for sharing this article with me. It helped me a lot and I love it.
Thank you for your articles. They are very helpful to me. May I ask you a question?
Your logic should be accepted as a given.
May I request that you elaborate on that? Your posts have been extremely helpful to me. Thank you!
Good web site! I truly love how it is easy on my eyes and the data are well written. I am wondering how I could be notified whenever a new post has been made. I’ve subscribed to your RSS which must do the trick! Have a nice day!
Thank you for writing this article. I appreciate the subject too.
Thank you for your articles. They are very helpful to me. May I ask you a question?
that’s a delightful opinion you have!
Thanks for posting. I really enjoyed reading it, especially because it addressed my problem. It helped me a lot and I hope it will help others too.
May I have information on the topic of your article?
May I request that you elaborate on that? Your posts have been extremely helpful to me. Thank you!
Your articles are extremely helpful to me. Please provide more information!
Dear Sir/mdm,
Hope you are doing well
We supply 4G solar cameras, explosion-proof cameras and underwater cameras for commercial use. Use of applications: ships, construction sites, oil rigs and nuclear reactor etc..
Do contact us for any enquiries and visit our website below
We also have nitrile gloves if you need some
Whatsapp: +65 87695655
Email: sales@thecctvpro.com
W: https://www.thecctvpro.com/
If you wish to unsubscribe, do reply to our email.
regards,
Raymond
Regardless if you believe in God or not, this message is a “must-read”!
All throughout time, we can see how we have been slowly conditioned to come to this point where we are on the verge of a cashless society. Did you know that the Bible foretold of this event almost 2,000 years ago?
In the book of Revelation 13:16-18, we read,
“He (the false prophet who deceives many by his miracles) causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.
Here is wisdom. Let him who has understanding calculate the number of the beast, for it is the number of a man: His number is 666.”
Speaking to the last generation, this could only be speaking of a cashless society. Why? Revelation 13:17 tells us that we cannot buy or sell unless we receive the mark of the beast. If physical money was still in use, we could buy or sell with one another without receiving the mark. This would contradict scripture that states we need the mark to buy or sell!
These verses could not be referring to something purely spiritual as scripture references two physical locations (our right hand or forehead) stating the mark will be on one “OR” the other. If this mark was purely spiritual, it would indicate both places, not one OR the other.
This is where it comes together. It is shocking how accurate the Bible is concerning the implantable RFID microchip. These are notes from a man named Carl Sanders who worked with a team of engineers to help develop this RFID chip
“Carl Sanders sat in seventeen New World Order meetings with heads-of-state officials such as Henry Kissinger and Bob Gates of the C.I.A. to discuss plans on how to bring about this one-world system. The government commissioned Carl Sanders to design a microchip for identifying and controlling the peoples of the world—a microchip that could be inserted under the skin with a hypodermic needle (a quick, convenient method that would be gradually accepted by society).
Carl Sanders, with a team of engineers behind him, with U.S. grant monies supplied by tax dollars, took on this project and designed a microchip that is powered by a lithium battery, rechargeable through the temperature changes in our skin. Without the knowledge of the Bible (Brother Sanders was not a Christian at the time), these engineers spent one-and-a-half-million dollars doing research on the best and most convenient place to have the microchip inserted.
Guess what? These researchers found that the forehead and the back of the hand (the two places the Bible says the mark will go) are not just the most convenient places, but are also the only viable places for rapid, consistent temperature changes in the skin to recharge the lithium battery. The microchip is approximately seven millimeters in length, .75 millimeters in diameter, about the size of a grain of rice. It is capable of storing pages upon pages of information about you. All your general history, work history, criminal record, health history, and financial data can be stored on this chip.
Brother Sanders believes that this microchip, which he regretfully helped design, is the “mark” spoken about in Revelation 13:16–18. The original Greek word for “mark” is “charagma,” which means a “scratch or etching.” It is also interesting to note that the number 666 is actually a word in the original Greek. The word is “chi xi stigma,” with the last part, “stigma,” also meaning “to stick or prick.” Carl believes this is referring to a hypodermic needle when they poke into the skin to inject the microchip.”
Mr. Sanders asked a doctor what would happen if the lithium contained within the RFID microchip leaked into the body. The doctor replied by saying a terrible sore would appear in that location. This is what the book of Revelation says:
“And the first (angel) went, and poured out his vial on the earth; and there fell a noisome and grievous sore on the men which had the mark of the beast, and on them which worshipped his image” (Revelation 16:2).
You can read more about it here–and to also understand the mystery behind the number 666: https://2ruth.org/rfid-mark-of-the-beast-666-revealed/
The third angel’s warning in Revelation 14:9-11 states,
“Then a third angel followed them, saying with a loud voice, ‘If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.’”
Who is Barack Obama, and why is he still involved in politics?
So what about his name? The meaning of someone’s name can say a lot about a person. God throughout history has given names to people that have a specific meaning tied to their lives. How about the name Barack Obama? Let us take a look at what may be hiding beneath the surface.
Jesus says in Luke 10:18, “…I saw Satan fall like lightning from heaven.”
The Hebrew Strongs word (H1299) for “lightning”: “bârâq” (baw-rawk)
In Isaiah chapter 14, verse 14, we read about Lucifer (Satan) saying in his heart:
“I will ascend above the heights of the clouds, I will be like the Most High.”
In the verses in Isaiah that refer directly to Lucifer, several times it mentions him falling from the heights or the heavens. The Hebrew word for the heights or heavens used here is Hebrew Strongs 1116: “bamah”–Pronounced (bam-maw’)
In Hebrew, the letter “Waw” or “Vav” is often transliterated as a “U” or “O,” and it is primarily used as a conjunction to join concepts together. So to join in Hebrew poetry the concept of lightning (Baraq) and a high place like heaven or the heights of heaven (Bam-Maw), the letter “U” or “O” would be used. So, Baraq “O” Bam-Maw or Baraq “U” Bam-Maw in Hebrew poetry similar to the style written in Isaiah, would translate literally to “Lightning from the heights.” The word “Satan” in Hebrew is a direct translation, therefore “Satan.”
So when Jesus told His disciples in Luke 10:18 that He beheld Satan fall like lightning from heaven, if this were to be spoken by a Jewish Rabbi today influenced by the poetry in the book of Isaiah, he would say these words in Hebrew–the words of Jesus in Luke 10:18 as, and I saw Satan as Baraq O Bam-Maw.
The names of both of Obama’s daughters are Malia and Natasha. If we were to write those names backward (the devil does things in reverse) we would get “ailam ahsatan”. Now if we remove the letters that spell “Alah” (Allah being the false god of Islam), we get “I am Satan”. Coincidence? I don’t think so.
Obama’s campaign logo when he ran in 2008 was a sun over the horizon in the west, with the landscape as the flag of the United States. In Islam, they have their own messiah that they are waiting for called the 12th Imam, or the Mahdi (the Antichrist of the Bible), and one prophecy concerning this man’s appearance is the sun rising in the west.
“Then I saw another angel flying in the midst of heaven, having the everlasting gospel to preach to those who dwell on the earth—to every nation, tribe, tongue, and people— saying with a loud voice, ‘Fear God and give glory to Him, for the hour of His judgment has come; and worship Him who made heaven and earth, the sea and springs of water.’” (Revelation 14:6-7)
Why have the words of Jesus in His Gospel accounts regarding His death, burial, and resurrection, been translated into over 3,000 languages, and nothing comes close (the Quran about 110 languages)? Because the same Spirit of God (YHVH) who created all people likewise transcends all people; therefore the power of His Word is not limited by people; while all other religions are man-made, therefore they tend to primarily stay within their own culture. The same God who speaks to all people through His creation of the heavens and earth that draws all people around the world likewise has sent His Word to the ends of the earth so that we may come to personally know Him to be saved in spirit and in truth through His Son Jesus Christ.
Jesus stands alone among the other religions that say to rightly weigh the scales of good and evil and to make sure you have done more good than bad in this life. Is this how we conduct ourselves justly in a court of law? Bearing the image of God, is this how we project this image into reality?
Our good works cannot save us. If we step before a judge, being guilty of a crime, the judge will not judge us by the good we have done, but rather by the crimes we have committed. If we as fallen humanity, created in God’s image, pose this type of justice, how much more a perfect, righteous, and Holy God?
God has brought down His moral laws through the 10 commandments given to Moses at Mt. Siani. These laws were not given so we may be justified, but rather that we may see the need for a savior. They are the mirror of God’s character of what He has written in our hearts, with our conscious bearing witness that we know that it is wrong to steal, lie, dishonor our parents, murder, and so forth.
We can try and follow the moral laws of the 10 commandments, but we will never catch up to them to be justified before a Holy God. That same word of the law given to Moses became flesh about 2,000 years ago in the body of Jesus Christ. He came to be our justification by fulfilling the law, living a sinless perfect life that only God could fulfill.
The gap between us and the law can never be reconciled by our own merit, but the arm of Jesus is stretched out by the grace and mercy of God. And if we are to grab on, through faith in Him, He will pull us up being the one to justify us. As in the court of law, if someone steps in and pays our fine, even though we are guilty, the judge can do what is legal and just and let us go free. That is what Jesus did almost 2,000 years ago on the cross. It was a legal transaction being fulfilled in the spiritual realm by the shedding of His blood with His last word’s on the cross crying out, “It is finished!” (John 19:30).
For God takes no pleasure in the death of the wicked (Ezekiel 18:23). This is why in Isaiah chapter 53, where it speaks of the coming Messiah and His soul being a sacrifice for our sins, why it says it pleased God to crush His only begotten Son.
This is because the wrath that we deserve was justified by being poured out upon His Son. If that wrath was poured out on us, we would all perish to hell forever. God created a way of escape by pouring it out on His Son whose soul could not be left in Hades but was raised and seated at the right hand of God in power.
So now when we put on the Lord Jesus Christ (Romans 13:14), where God no longer sees the person who deserves His wrath, but rather the glorious image of His perfect Son dwelling in us, justifying us as if we received the wrath we deserve, making a way of escape from the curse of death; now being conformed into the image of the heavenly man walking in a new nature, and no longer in the image of the fallen man Adam.
Now what we must do is repent and put our trust and faith in the savior, confessing and forsaking our sins, and to receive His Holy Spirit that we may be born again (for Jesus says we must be born again to see and enter the Kingdom of God in John chapter 3). This is not just head knowledge of believing in Jesus, but rather receiving His words, taking them to heart, so that we may truly be transformed into the image of God. Where we no longer live to practice sin, but rather turn from our sins and practice righteousness through faith in Him in obedience to His Word by reading the Bible.
Our works cannot save us, but they can condemn us; it is not that we earn our way into everlasting life, but that we obey our Lord Jesus Christ:
Jesus says,
“Not everyone who says to Me, ‘Lord, Lord,’ shall enter the kingdom of heaven, but he who does the will of My Father in heaven. Many will say to Me in that day, ‘Lord, Lord, have we not prophesied in Your name, cast out demons in Your name, and done many wonders in Your name?’ And then I will declare to them, ‘I never knew you; depart from Me, you who practice lawlessness!’ (Matthew 7:21-23)
“And having been perfected, He became the author of eternal salvation to all who obey Him.” (Hebrews 5:9)
“Now I saw a new heaven and a new earth, for the first heaven and the first earth had passed away. Also there was no more sea. Then I, John, saw the holy city, New Jerusalem, coming down out of heaven from God, prepared as a bride adorned for her husband. And I heard a loud voice from heaven saying, ‘Behold, the tabernacle of God is with men, and He will dwell with them, and they shall be His people. God Himself will be with them and be their God. And God will wipe away every tear from their eyes; there shall be no more death, nor sorrow, nor crying. There shall be no more pain, for the former things have passed away.’
Then He who sat on the throne said, ‘Behold, I make all things new.’ And He said to me, ‘Write, for these words are true and faithful.’
And He said to me, ‘It is done! I am the Alpha and the Omega, the Beginning and the End. I will give of the fountain of the water of life freely to him who thirsts. He who overcomes shall inherit all things, and I will be his God and he shall be My son. But the cowardly, unbelieving, abominable, murderers, sexually immoral, sorcerers, idolaters, and all liars shall have their part in the lake which burns with fire and brimstone, which is the second death.’” (Revelation 21:1-8)
Please tell me more about this. May I ask you a question?
Thank you for writing this article. I appreciate the subject too.
Please tell me more about this. May I ask you a question?
Thank you for writing this article. I appreciate the subject too.
청도페이스라인출장
I’m not sure where you are getting your info, but good topic. I needs to spend some time learning more or understanding more. Thanks for wonderful information I was looking for this info for my mission.
Thank you for writing this post!
Please tell me more about this. May I ask you a question?
Your articles are very helpful to me. May I request more information?
Hi there
I Just checked your energy-from-space.com ranks and saw that your site is trending down for some time.
If you are looking for a trend reversal, we have the right solution for you
We are offering affordable Content Marketing plans with humanly written SEO content
For more information, please check our offers
https://www.digital-x-press.com/product/content-marketing/
Thanks and regards
Mike Dickinson
I really appreciate your help
Great content! Super high-quality! Keep it up!
Thanks for posting. I really enjoyed reading it, especially because it addressed my problem. It helped me a lot and I hope it will help others too.
You’ve been great to me. Thank you!
We’re a gaggle of volunteers and starting a new scheme in our community.
Your website offered us with useful information to work on. You’ve done a formidable job and our whole community shall be grateful to you.
Great beat ! I would like to apprentice while you amend your web site, how could i subscribe for a blog site? The account helped me a acceptable deal. I had been a little bit acquainted of this your broadcast provided bright clear concept
Your articles are extremely helpful to me. May I ask for more information?
Thanks for your help and for writing this post. It’s been great.
You’ve been great to me. Thank you!
I’d like to find out more? I’d love to find out more details.
Thank you for writing this post. I like the subject too.
Thank you for providing me with these article examples. May I ask you a question?
Your articles are extremely helpful to me. Please provide more information!
Thank you for your articles. They are very helpful to me. May I ask you a question?
Can you write more about it? Your articles are always helpful to me. Thank you!
Thank you for writing this post!
Ողջույն, ես ուզում էի իմանալ ձեր գինը.
Your articles are extremely helpful to me. Please provide more information!
Thank you for writing this post!
Thank you for sharing this article with me. It helped me a lot and I love it.
Thanks for posting. I really enjoyed reading it, especially because it addressed my problem. It helped me a lot and I hope it will help others too.
Thank you for your articles. They are very helpful to me. May I ask you a question?
I’m extremely pleased to discover this web site.
I wanted to thank you for ones time due to this wonderful read!!
I definitely really liked every bit of it and i also have you bookmarked to
see new things on your blog.
You helped me a lot with this post. I love the subject and I hope you continue to write excellent articles like this.
Thank you for writing this article. I appreciate the subject too.
Good web site! I truly love how it is easy on my eyes and the data are well written. I am wondering how I could be notified whenever a new post has been made. I’ve subscribed to your RSS which must do the trick! Have a nice day!
Your articles are extremely helpful to me. May I ask for more information?
Thank you for your help and this post. It’s been great.
The articles you write help me a lot and I like the topic
I want to thank you for your assistance and this post. It’s been great.
Thank you for your help and this post. It’s been great.
Sustain the excellent work and producing in the group!
Hello there, just become aware of your weblog thru Google, and located that it is truly informative. I am going to watch out for brussels. I’ll be grateful for those who proceed this in future. A lot of other people can be benefited from your writing. Cheers!|
Can you write more about it? Your articles are always helpful to me. Thank you!
Thank you for your post. I really enjoyed reading it, especially because it addressed my issue. It helped me a lot and I hope it will also help others.
I really like your blog.. very nice colors & theme. Did you create this website yourself or did you hire someone to do it for you? Plz reply as I’m looking to construct my own blog and would like to know where u got this from. kudos|
I am genuinely happy to read this website posts which consists of tons of helpful data, thanks for providing these kinds of information.|
Your articles are extremely helpful to me. Please provide more information!
Your articles are very helpful to me. May I request more information?
Cool. I spent a long time looking for relevant content and found that your article gave me new ideas, which is very helpful for my research. I think my thesis can be completed more smoothly. Thank you.
Great post but I was wanting to know if you could write a litte more on this subject? I’d be very thankful if you could elaborate a little bit more. Kudos!|
Hi
I have just took an in depth look on your energy-from-space.com for the ranking keywords and saw that your website could use an upgrade.
We will improve your SEO metrics and ranks organically and safely, using only whitehat methods, while providing monthly reports and outstanding support.
Please check our plans here, we offer SEO at cheap rates.
https://www.hilkom-digital.de/cheap-seo-packages/
Regards
Mike Fisher
PS: Quality SEO content is included
Thank you for writing this post. I like the subject too.
Hey there would you mind letting me know which webhost you’re using? I’ve loaded your blog in 3 different web browsers and I must say this blog loads a lot faster then most. Can you recommend a good internet hosting provider at a reasonable price? Thanks, I appreciate it!|
Thank you for sharing this article with me. It helped me a lot and I love it.
Thank you for your articles. They are very helpful to me. Can you help me with something?
Thank you for writing this post!
May I request that you elaborate on that? Your posts have been extremely helpful to me. Thank you!
Can you write more about it? Your articles are always helpful to me. Thank you!
Thank you for your articles. They are very helpful to me. Can you help me with something?
Saved as a favorite, I really like your content.
Thank you for sharing this article with me. It helped me a lot and I love it.
I bookmarked it. The blog was how do i say it… relevant, finally something that helped me. Thanks:)
May I have information on the topic of your article?
You helped me a lot with this post. I love the subject and I hope you continue to write excellent articles like this.
May I request that you elaborate on that? Your posts have been extremely helpful to me. Thank you!
How can I find out more about it?
I have been examinating out some of your posts and i must say nice stuff. I will surely bookmark your site.
Hello there! This is kind of off topic but I need some help from an established blog. Is it very hard to set up your own blog? I’m not very techincal but I can figure things out pretty fast. I’m thinking about making my own but I’m not sure where to start. Do you have any tips or suggestions? Thank you
Magnificent items from you, man. I have take into accout your stuff previous to and you are simply too wonderful. I really like what you’ve bought right here, certainly like what you are saying and the way in which during which you say it. You are making it entertaining and you still care for to keep it sensible. I cant wait to read far more from you. That is actually a great site.
you’ve a great blog right here! would you like to make some invite posts on my weblog?
F*ckin?awesome things here. I am very glad to see your post. Thanks a lot and i am looking forward to contact you. Will you kindly drop me a e-mail?
Hello there! This is my first visit to your blog! We are a collection of volunteers and starting a new initiative in a community in the same niche. Your blog provided us useful information to work on. You have done a marvellous job!
Thanks for your article on the vacation industry. I will also like to add that if you’re a senior taking into account traveling, it truly is absolutely crucial that you buy travel insurance for elderly people. When traveling, senior citizens are at greatest risk being in need of a health emergency. Having the right insurance package for one’s age group can look after your health and provide you with peace of mind.
Hello! This is my first visit to your blog! We are a team of volunteers and starting a new project in a community in the same niche. Your blog provided us beneficial information to work on. You have done a outstanding job!
Heya i am for the first time here. I found this board and I find It truly useful & it helped me out a lot. I hope to give something back and aid others like you aided me.
I抳e read some excellent stuff here. Certainly price bookmarking for revisiting. I surprise how much effort you place to make any such fantastic informative web site.
Hey there, You have done an excellent job. I抣l certainly digg it and for my part recommend to my friends. I’m sure they’ll be benefited from this web site.
I know this if off topic but I’m looking into starting my own blog and was wondering what all is needed to get setup? I’m assuming having a blog like yours would cost a pretty penny? I’m not very web savvy so I’m not 100 certain. Any suggestions or advice would be greatly appreciated. Appreciate it
Great ?I should certainly pronounce, impressed with your web site. I had no trouble navigating through all the tabs and related info ended up being truly easy to do to access. I recently found what I hoped for before you know it in the least. Quite unusual. Is likely to appreciate it for those who add forums or anything, web site theme . a tones way for your customer to communicate. Nice task..
This website online is really a walk-through for all of the information you wished about this and didn抰 know who to ask. Glimpse right here, and you抣l positively discover it.
Hi, Neat post. There is a problem with your site in internet explorer, would test this?IE still is the market leader and a big portion of people will miss your magnificent writing because of this problem.
Hi there, simply was aware of your blog thru Google, and found that it is really informative. I抦 going to be careful for brussels. I抣l be grateful when you proceed this in future. Lots of folks will be benefited out of your writing. Cheers!
I have been absent for a while, but now I remember why I used to love this site. Thank you, I抣l try and check back more frequently. How frequently you update your site?
[…] The climate debate! […]
When I initially commented I clicked the -Notify me when new feedback are added- checkbox and now each time a comment is added I get 4 emails with the identical comment. Is there any approach you can remove me from that service? Thanks!
Dear Sir/Madam,
I was asked to contact you and Haven obtained your contact details from a reliable source as a potential partner. We are happy to introduce to you a woman with a Capital of 59.9 Million USD from Saudi Arabia searching for a good person to invest in your country. We are a renowned investment-brokering agent in your country and we offer irresistible service investment providers from your country.
We are by this email letter offering you an irresistible joint (Partnership), so as to allow us to have you as our representative and manager of investment funds partnership in your country within the time frame of the investment relationship. Since we cannot determine if this email is functional or valid and also your willingness, we have kept this proposal brief.
We are in the hope to share this irresistible offer with you based on a partnership investment program within your country. If you are interested in this partnership, please respond with your direct telephone and give us your full contact details plus your company profile if any, and in your response, we will send you an elaborate email with details of this kind of offer on how to see face to face then email: info@linkinvestmentuk.com.
Your expedient response will be appreciated.
Thank you.
Santos Michael
London, UK
+(44) 74 52349949
Link Investment
London
UK
allslots caesars slots free casino slim slots free games lucky slots 777 free play
Ограничение на количество символов: Сообщение может содержать не более 1000 символов, что может быть недостаточно для некоторых пользователей.
Электрическая дератизация – это способ борьбы с крысами и мышами при помощи высоковольтного электричества.
Thanks , I’ve recently been searching for info approximately this subject for a long time and yours is the best I’ve came upon till now. However, what about the bottom line? Are you certain concerning the supply?
[…] The climate debate! […]
Me wanted to grab a chance to articulate my gratitude towards this incredible piece you have just put out on your site. As a reader who’s profoundly fascinated, I discovered the write-up being an irreplaceable asset that has tremendously enhanced the comprehension about the subject matter.
The thing caught me first regarding the write-up is the comprehensiveness of research and knowledge which you showed throughout. It is obvious that you obviously are deeply passionate about this topic and have taken careful consideration to compile data from a variety of sources to offer an all-encompassing overview. The consequence is a write-up that not only enlightens, but also motivates more exploration and study.
That structure of the piece was furthermore outstanding. I liked how you launched with a extensive overview of the topic prior to immersing into further particular features. This enabled me to understand more easily the background and importance of the facts provided subsequently. The employment of subcategories and distinct separators made it effortless to pursue the course of the composition and discover the facts I needed.
One’s method of writing is apparent, concise, yet engaging and inviting. One have a skill for delineating intricate concepts in a way that is conveniently grasped and connected. The utilization of cases and narratives to demonstrate your views was especially effective and helped me to better remember the information presented.
I also value that you took the time to quote your sources all over the article. This shows a devotion to accuracy and integrity in your writing that is all too rare these days. I have already commenced exploring some of the sources you discussed and have found them to be incredibly beneficial in widening my comprehension of the topic.
But what I valued about your article was the practical counsel and feasible insights that you offered. It is apparent that you have a deep understanding of the obstacles and chances associated with article, and you have presented a plenty of information that will be useful to anyone looking to find out more about this subject. I distinctly valued the suggestions and plans that you provided for [specific aspect of topic], as well as the materials and equipment that you advised.
In general, I cannot properly express how much I appreciate the effort that you have dedicated to crafting this article. It is an remarkable piece of writing that was crafted with careful precision. It has undoubtedly had a considerable impact on my understanding, and I have no doubt that it will be a beneficial reference for anyone seeking to learn more about this subject in the future.
If you’re in search of a beneficial resource that offers captivating and knowledgeable writing, I deeply advocate perusing
my website https://www.twitch.tv/vikaletova . Resolute to offering beneficial insights and appropriate pointers, you are sure to find something which will enhance your survival and help you in attaining your goals. Don’t be reluctant, stop by and discover how much you may gain.
Thank you once again for your commitment to excellent writing and research. Your efforts are truly appreciated, and we are grateful for the value you contribute to the field.
Can you write more about it? Your articles are always helpful to me. Thank you!
Greetings
I would like to extend a professional and alluring business
opportunity to you. Please respond to my email address below
(dir.chau009@gmail.com) for further deliberation.
Thank you.
Dir. Chewn
May I have information on the topic of your article?
It is indeed my belief that mesothelioma is actually the most deadly cancer. It’s got unusual characteristics. The more I actually look at it the greater I am sure it does not respond like a true solid human cancer. If mesothelioma is really a rogue viral infection, in that case there is the possibility of developing a vaccine and also offering vaccination to asbestos exposed people who are really at high risk connected with developing long run asbestos linked malignancies. Thanks for expressing your ideas about this important health issue.
Найдите модели 3D принтеров для ваших нужд
3D принтеры для дома [url=https://www.3d-prt.ru]https://www.3d-prt.ru[/url].
I have learn a few just right stuff here. Certainly price bookmarking for revisiting. I wonder how so much attempt you place to create one of these fantastic informative site.
Hey there just wanted to give you a brief heads up and let you know a few of the images aren’t loading properly. I’m not sure why but I think its a linking issue. I’ve tried it in two different browsers and both show the same outcome.
Кроме того, интерфейс CandyMail.org очень простой и интуитивно понятный, что делает его очень удобным в использовании. Также у сервиса нет рекламы или других отвлекающих элементов, что делает его еще более привлекательным для пользователей.
Wow! This can be one particular of the most beneficial blogs We have ever arrive across on this subject. Actually Magnificent. I am also an expert in this topic therefore I can understand your hard work.
This article is a goldmine of information. The author has covered all the important aspects of the topic and provided valuable insights that are hard to find elsewhere. I appreciate the clarity of explanations and the practical examples that make the content relatable. Well done!
Статья обладает нейтральным тоном и представляет различные точки зрения. Хорошо, что автор уделил внимание как плюсам, так и минусам рассматриваемой темы.
If some one wishes expert view about running a blog afterward i advise him/her
to go to see this website, Keep up the pleasant job.
It’s my belief that mesothelioma is actually the most dangerous cancer. It contains unusual features. The more I actually look at it a lot more I am assured it does not behave like a true solid flesh cancer. When mesothelioma is actually a rogue viral infection, in that case there is the potential for developing a vaccine along with offering vaccination to asbestos exposed people who are at high risk of developing upcoming asbestos linked malignancies. Thanks for discussing your ideas on this important ailment.
Я бы хотел выразить свою благодарность автору этой статьи за его профессионализм и преданность точности. Он предоставил достоверные факты и аргументированные выводы, что делает эту статью надежным источником информации.
Hello
I have just took an in depth look on your energy-from-space.com for onsite errors and saw that your website has a handful of issues which should be addressed.
No matter what you are offering or selling, having a poor optimized site, full of bugs and errors, will never help your ranks.
Let us fix your wordpress site errors today and get your ranks reach their full potential
More info:
https://www.digital-x-press.com/product/wordpress-seo-audit-and-fix-service/
Regards
Mike Longman
Автор приводит примеры из различных источников, что позволяет получить более полное представление о теме. Статья является нейтральным и информативным ресурсом для тех, кто интересуется данной проблематикой.
It’s actually a great and helpful piece of information. I am satisfied that you shared this useful information with us.
Please keep us up to date like this. Thanks for sharing.
Я не могу не отметить качество исследования, представленного в этой статье. Она обогатила мои знания и вдохновила меня на дальнейшее изучение темы. Благодарю автора за его ценный вклад!
Надеюсь, вам понравятся эти комментарии!
Заказать элайнеры в СПб: прайс-лист и цены
установить элайнеры в спб [url=http://www.spb-stomatologie.ru]http://www.spb-stomatologie.ru[/url].
Я просто не могу не поделиться своим восхищением этой статьей! Она является источником ценных знаний, представленных с таким ясным и простым языком. Спасибо автору за его умение сделать сложные вещи доступными!
Hi!
Get ahead in the financial game with binary options trading on our platform. Earn high returns of up to 200% with a low $10 deposit. Enjoy simple and secure trading with real-time market analysis and a user-friendly interface. Stay in control of your investments with anytime, anywhere access and advanced security measures. Start your successful journey now!
Earn every minute without limit of $100, $500, $1,000, with a minimum bet of $1.
Instant withdrawal!!!
WARNING! If you are trying to access the site from the following countries, you need to enable VPN which does not apply to the following countries!
Australia, Canada, USA, Japan, UK, EU (all countries), Israel, Russia, Iran, Iraq, Korea, Central African Republic, Congo, Cote d’Ivoire, Eritrea, Ethiopia, Lebanon, Liberia, Libya, Mali, Mauritius, Myanmar, New Zealand, Saint Vincent and the Grenadines, Somalia, Sudan, Syria, Vanuatu, Yemen, Zimbabwe.
Sign up and start earning from the first minute!
https://trkmad.com/101773
The other day, while I was at work, my sister stole my iphone and tested to see if it can survive a 40 foot drop, just so she can be a youtube sensation. My iPad is now destroyed and she has 83 views. I know this is totally off topic but I had to share it with someone!
Я благодарен автору этой статьи за его тщательное и глубокое исследование. Он представил информацию с большой детализацией и аргументацией, что делает эту статью надежным источником знаний. Очень впечатляющая работа!
Ufieuhdidhefh wjdwdjqwidjwefhwfakj oijofqwfbvsdfjfwej ijwqiofjewuhfwedjawdhewh ouhwidwjpouweiofeiouqwruio ioqwiwuifewifjfifhw jiwfjiewhfewgiewufewio energy-from-space.com
Статья представляет интересный взгляд на данную тему и содержит ряд полезной информации. Понравилась аккуратная структура и логическое построение аргументов.
Автор представил широкий спектр мнений на эту проблему, что позволяет читателям самостоятельно сформировать свое собственное мнение. Полезное чтение для тех, кто интересуется данной темой.
Oh my goodness! an amazing article dude. Thanks Nonetheless I am experiencing problem with ur rss . Don抰 know why Unable to subscribe to it. Is there anyone getting an identical rss downside? Anybody who is aware of kindly respond. Thnkx
Я просто не могу пройти мимо этой статьи без оставления положительного комментария. Она является настоящим примером качественной журналистики и глубокого исследования. Очень впечатляюще!
Я хотел бы выразить свою благодарность автору этой статьи за исчерпывающую информацию, которую он предоставил. Я нашел ответы на многие свои вопросы и получил новые знания. Это действительно ценный ресурс!
Автор представляет различные точки зрения на проблему без предвзятости.
I don’t think the title of your article matches the content lol. Just kidding, mainly because I had some doubts after reading the article. https://accounts.binance.com/cs/register?ref=OMM3XK51
Informative article, exactly what I needed.
Мне понравилась четкая структура статьи, которая помогает легко ориентироваться в тексте.
Надеюсь, вам понравятся и эти комментарии!
Статья содержит информацию, подкрепленную надежными источниками, представленную без предвзятости.
Автор статьи представляет информацию в объективной манере, избегая субъективных оценок.
Эта статья просто великолепна! Она представляет информацию в полном объеме и включает в себя практические примеры и рекомендации. Я нашел ее очень полезной и вдохновляющей. Большое спасибо автору за такую выдающуюся работу!
Очень хорошо исследованная статья! Она содержит много подробностей и является надежным источником информации. Я оцениваю автора за его тщательную работу и приветствую его старания в предоставлении читателям качественного контента.
Мне понравился четкий и структурированный стиль изложения в статье.
Я прочитал эту статью с большим удовольствием! Она написана ясно и доступно, несмотря на сложность темы. Большое спасибо автору за то, что делает сложные понятия понятными для всех.
What this service will give your site:
1. Growth in Google search results to TOP 1
2. Growth of DA to 60.
3. Huge increase in organic traffic to your site from Google SERPs.
Details here: http://seo.c-xsmb.com/seo-backlinks
Очень хорошо структурированная статья! Я оцениваю ясность и последовательность изложения. Благодаря этому, я смог легко следовать за логикой и усвоить представленную информацию. Большое спасибо автору за такой удобный формат!
The climate debate! – My Blog
–
Hello guys! Nice Article! Please Read!
Производя поиск в сети, веб-серфер,юзер рано или поздно столкнется с интеренет-магазином мега магазин: мега даркнет. Многие юзеры интернета хотят закупаться быстро и абсолютно безопасно. Нереально внушительный айти маркет c интересными товарами,которые не найдешь в Гугле, представлен на странице mega darknet – https://xn--mg-8ma3631a.com. При регистрации на портале или в переписках никому не сообщайте свои личные данные, придумайте логин и псевдоним, который отличается от логина. Также выдумайте надёжный пароль от 8 символов и больше.
Эта статья просто великолепна! Она представляет информацию в полном объеме и включает в себя практические примеры и рекомендации. Я нашел ее очень полезной и вдохновляющей. Большое спасибо автору за такую выдающуюся работу!
Приятно видеть, что автор не делает однозначных выводов, а предоставляет читателям возможность самостоятельно анализировать представленные факты.
Oh my goodness! Awesome article dude! Thank you, However I am experiencing difficulties with your RSS.
I don’t understand the reason why I can’t subscribe to it.
Is there anyone else having similar RSS problems?
Anyone that knows the solution will you kindly respond?
Thanks!!
It has been simply incredibly generous with you to provide openly what exactly many individuals would’ve marketed for an ebook to end up making some cash for their end, primarily given that you could have tried it in the event you wanted.
Надеюсь, эти комментарии дополнят ваш положительный отзыв об информационной статье!
The article provides a comprehensive analysis of the data.
Appreciating the persistence you put into your site and detailed information you present. It’s good to come across a blog every once in a while that isn’t the same old rehashed information. Excellent read! I’ve bookmarked your site and I’m adding your RSS feeds to my Google account.
The article offers a variety of perspectives on the issue.
Мне понравилось, как автор представил информацию в этой статье. Я чувствую, что стал более осведомленным о данной теме благодаря четкому изложению и интересным примерам. Безусловно рекомендую ее для прочтения!
Live the Dream in Bali
Bali Villas – Make an Investment in Paradise
Bali: Invest in real estate and live in paradise
Bali Villas for Sale – Find Your Perfect Home Now
The author explores the practical implications of the research.
Hello
Defrost frozen foods in minutes safely and naturally with our THAW KING™.
50% OFF for the next 24 Hours ONLY + FREE Worldwide Shipping for a LIMITED
Buy now: https://thawking.co
Best,
Petra
I love it whenever people come together and share thoughts.
Great site, keep it up!
Bali villas for sale
Spectacular Bali Villas For Sale
Buying a Bali Villa – The Perfect Investment
Wow! Thank you! I continuously needed to write on my blog something like that. Can I include a part of your post to my site?
You actually make it appear so easy with your presentation but I find this topic to be really one thing that I feel I
might never understand. It seems too complex and extremely wide for me.
I’m looking forward on your subsequent post, I will
try to get the dangle of it!
Feel free to surf to my site how much value does a basement add to a house
A Perfect Place to Call Home
Best Bali Villas for Sale
Find Your Ideal Home in Bali – Villas for Sale
Villas for Sale in Bali
Immaculate Bali Villas for Sale}
I was more than happy to find this web-site.I wanted to thanks in your time for this glorious read!! I positively having fun with every little little bit of it and I have you bookmarked to take a look at new stuff you blog post.
Bali Villas for Sale – A Perfect Place to Call Home
Find Your Perfect Home Abroad with Bali Villas for Sale
It’s going to be ending of mine day, but before ending
I am reading this wonderful piece of writing to
increase my know-how.
Wow, that’s what I was searching for, what a material! present here at this webpage,
thanks admin of this website.
Hi there,
I have recently conducted an analysis of energy-from-space.com for onsite errors and discovered that your website presents several issues that require attention.
Regardless of the product or service you are offering or selling, possessing a site that is inadequately optimized and rife with errors and bugs will not aid in boosting your rankings.
Let us fix your WordPress website problems today and improve your search engine rankings.
More info:
https://www.digital-x-press.com/product/wordpress-seo-audit-and-fix-service/
Regards
Mike Conors
This is really fascinating, You are an overly skilled blogger.
I’ve joined your feed and sit up for in the hunt for
more of your magnificent post. Also, I have shared your site in my social networks
Hello. And Bye.
Invest in a Villa in Bali
Write more, thats all I have to say. Literally, it seems as though you relied on the video to make your point. You clearly know what youre talking about, why waste your intelligence on just posting videos to your blog when you could be giving us something informative to read?
В современном мире, где онлайн-присутствие становится все более важным для бизнеса, повышение видимости и ранжирования сайта в поисковых системах является одной из самых важных задач для веб-мастеров и маркетологов. Одним из основных факторов, влияющих на рост авторитетности сайта, является его DR (Domain Rating), который определяется в основном путем анализа ссылочной массы сайта.
Мне понравился объективный подход автора, который не пытается убедить читателя в своей точке зрения.
I will right away grab your rss feed as I can’t find your e-mail subscription link or e-newsletter service. Do you have any? Please let me know so that I could subscribe. Thanks.
I’m extremely impressed with your writing talents
and also with the layout for your blog. Is this a
paid subject matter or did you modify it your self?
Either way stay up the nice high quality writing, it is uncommon to
look a nice blog like this one these days..
Breathtaking Bali Villas for Sale
9 Exquisite Bali Villas for Sale
Best value Bali Villas
The Best Bali Villas for Sale
Thank you for the good writeup. It in fact was a amusement account it. Look advanced to more added agreeable from you! However, how could we communicate?
Доставка водородного генератора по России
генератор водородной воды купить в москве [url=http://www.japonica-beauty.ru]http://www.japonica-beauty.ru[/url].
Купите качественный водородный генератор!
водородный генератор цена [url=http://www.japonica-beauty.store/]http://www.japonica-beauty.store/[/url].
Good morning! energy-from-space.com
Did you know that it is possible to send commercial offer legitimately? We suggest a new, unique way of sending commercial offers through contact forms. These feedback forms can be spotted on many websites.
When such messages are sent, no personal data is used, and they are securely sent to forms that have been specifically designed to receive messages and appeals. As these messages are deemed important, the ones sent by Feedback Forms are not classified as spam.
We give you a chance to experience our service for free.
Our service offers up to 50,000 messages for you.
The cost of sending one million messages is $59.
This message was automatically generated.
Please use the contact details below to get in touch with us.
Contact us.
Telegram – https://t.me/FeedbackFormEU
Skype live:feedbackform2019
WhatsApp +375259112693
WhatsApp https://wa.me/+375259112693
We only use chat for communication.
Remarkable Bali Villas for Sale
Buy Your Dream Bali Villa
Fine Properties for Sale in Bali – Find the Best One for You
Ideal location for your Bali dream home
Я оцениваю фактическую базу, представленную в статье.
Автор представляет свои аргументы с ясной логикой и последовательностью.
I appreciate, result in I found exactly what I used to be looking for.
You’ve ended my four day lengthy hunt! God Bless you man. Have a great day.
Bye
Какие услуги можно использовать для скачивания пари
Бесплатно скачать пари игру для компьютера
Пари: безопасные инвестиции
Скачайте бесплатное пари: мгновенные результаты
Hello there,
If you are one of the sufferers of the common problems nails have, then you are in luck! Our Toenail Clippers is here to help. It has a specially designed clip that can help those with troubles with winding nails, hard nails, two nails, nail cracks, deep nails, and thickened nails.
We are confident that our Toenail Clippers will provide you with the results you are looking for.
Get yours today with 60% OFF: https://podiatristusa.sale
The Best,
Madie
Автор предоставляет разнообразные источники, которые можно использовать для дальнейшего изучения темы.
Hi there! This post could not be written any better!
Looking through this article reminds me of my previous roommate!
He always kept preaching about this. I will send this article to him.
Fairly certain he’ll have a good read. Thanks for sharing!
Hi there
This is Mike Hancock
Let me present you our latest research results from our constant SEO feedbacks that we have from our plans:
https://www.strictlydigital.net/product/semrush-backlinks/
The new Semrush Backlinks, which will make your energy-from-space.com SEO trend have an immediate push.
The method is actually very simple, we are building links from domains that have a high number of keywords ranking for them.
Forget about the SEO metrics or any other factors that so many tools try to teach you that is good. The most valuable link is the one that comes from a website that has a healthy trend and lots of ranking keywords.
We thought about that, so we have built this plan for you
Check in detail here:
https://www.strictlydigital.net/product/semrush-backlinks/
Cheap and effective
Try it anytime soon
Regards
Mike Hancock
mike@strictlydigital.net
An attention-grabbing dialogue is worth comment. I feel that you need to write extra on this topic, it might not be a taboo topic however generally persons are not enough to speak on such topics. To the next. Cheers
Growth Strategies for Effective Digital Marketing
online social marketing [url=http://cb-top.com/]http://cb-top.com/[/url].
Скачать Пари и Установить Свое Превосходство
Безопасное пари: Установить Пари
Дешево Скачать Пари
Получите больше денег с помощью Пари
Appreciate this post. Will try it out.
Great blog here! Also your web site loads up fast! What host
are you using? Can I get your affiliate link to your host?
I wish my web site loaded up as fast as yours lol
Взгляд на ИИ и новейшие технологии
Hello,
How are you doing? My name is Mr Michalak Aleksandra, and I am a financial consultant. I am reaching out to you today to offer my expertise, experience, and network of investors to assist you in achieving your business goals.
We are a financial consulting firm and we have reputable investors that are expanding their global presence by investing in viable projects across the globe. They are willing to Invest from $1,000,000 and above in viable project(s) at 3% ROI per annum for 1-10 years and 12 months moratorium.
If you have viable projects that need funding, kindly send your business plan/executive summary for our review and possible funding.
If you are interested in any of the above, kindly respond to us via this email
michalakaleksandrama@gmail.com I wait to hear from you.
Regards,
Michalak Aleksandra
E-mail: michalakaleksandrama@gmail.com
Hi there, this weekend is good in support of me, for the
reason that this moment i am reading this great informative post here at my residence.
Havve a look at mmy page :: 币安注册 (Chassidy)
Discover the Magic of Bitcoin: Buy a Wallet File with 12600 BTC http://fast12600jackpot.joker-gaming.xyz/turbo12600boost
Статья предлагает широкий обзор темы, представляя разные точки зрения и подробности.
Thanks for revealing your ideas. I might also like to say that video games have been ever before evolving. Today’s technology and innovative developments have helped create genuine and fun games. Most of these entertainment video games were not actually sensible when the actual concept was first of all being experimented with. Just like other styles of technological innovation, video games too have had to grow by way of many ages. This is testimony on the fast development of video games.
Новейшие Пари для скачивания
Зарабатывай
Оригинальная платформа для приумножения ваших средств
Откройте доступ к финансовым инструментам с помощью Пари!
Howdy! Someone in my Myspace group shared this site with us so I came to take
a look. I’m definitely loving the information. I’m book-marking and will be tweeting this to my followers!
Great blog and brilliant design.
Hi! I’ve been reading your weblog for a long time now and
finally got the bravery to go ahead and give you a shout
out from Austin Texas! Just wanted to say keep up the great
work!
Быстро скачать Пари
Download Pari – Get Started Now
Простое скачивание Пари
Лучшее Приложение для Скачивания Пари
Magnificent items from you, man. I have take into
account your stuff previous to and you’re simply extremely fantastic.
I actually like what you have received here, really like what you are stating and the way in which wherein you are
saying it. You’re making it enjoyable and you continue
to take care of to keep it sensible. I cant wait to learn much
more from you. That is actually a wonderful web site.
I know this web site provides quality dependent articles and other stuff, is there any other website which offers these
things in quality?
Читателям предоставляется возможность оценить представленные данные и сделать собственные выводы.
I don抰 even understand how I finished up right here, but I believed this post was good. I don’t know who you are but definitely you are going to a famous blogger in the event you are not already 😉 Cheers!
Пари – бесплатное скачивание
Качайте Пари быстро
Не пропустите шанс загрузить Пари
Загрузите Пари прямо сейчас
Thanks a bunch for sharing this with all of us you actually realize what you are speaking
approximately! Bookmarked. Please also talk over with my web site =).
We can have a hyperlink change contract among us
What i don’t realize is if truth be told how you’re not actually much more smartly-appreciated than you might be now.
You’re so intelligent. You recognize thus significantly in terms of this topic, produced me personally
imagine it from so many numerous angles. Its
like women and men don’t seem to be involved unless it’s one thing to accomplish with Girl gaga!
Your individual stuffs great. At all times care for it up!
Way cool! Some very valid points! I appreciate you penning
this post and also the rest of the website is also very good.
Review my site – Beton Jayamix
Ускорьте и обновляйте Пари – бесплатно
Быстрый и надежный сервис для скачивания Пари
2.Получи доступ к новейшим версиям Пари безопасно и просто
3.Загрузите новейшую версию Пари для вашего устройства
4.Просто и безопасно скачайте инновационное Пари
5.Находите правильную версию Пари
6.Доступ к удобному скачиванию Пари для вашего устройства
7.Надежный и беспроблемный способ скачать Пари
8.Быстро и безболезненно скачать и использовать Пари
9.Найдите вашу версию Пари
10.Благодаря Пари можно работать быстрее
11.Скачайте Пари и откройте для себя настоящую бесплатность
12.Получение траста с Пари
13.Скачайте и пользуйтесь бесплатными версиями Пари
14.Наслаждайтесь множеством возможностей бесплатного Пари для вашего сервиса
15.Установка Пари за несколько минут
16.Получите доступ к бесплатному Пари, используя простую, интуитивную установку
17.Мгновенно скачайте и используйте бесплатное Пари с лучшим сервисом для скачивания
18.Просто и без забот используйте простой способ скачать Пари
19.Пройдите шаг за шагом по простой инструк
Bali Real Estate: Live in Paradise Right Now
It’s impressive that you are getting ideas from this piece of writing as well as from our argument made at this place.
Hello There. I found your blog using msn. This is a very
well written article. I will be sure to bookmark it and come
back to read more of your useful info. Thanks for the post.
I will certainly comeback.
My web page Harga Pagar Panel
Golf Course Properties for Sale in Bali
Мне понравилась аргументация автора, основанная на логической цепочке рассуждений.
I need to to thank you for this wonderful read!!
I definitely loved every bit of it. I’ve got you book-marked to
check out new things you post…
My website :: Harga U Ditch
When some one searches for his required thing, thus
he/she wants to be available that in detail, therefore that thing is maintained over here.
I am іn fact happy to read tһіs web site posts wich іncludes plenty
օf valuable data, tһanks for providing these kinds oof іnformation.
My blog post: Túi xách hàng hiệu
This blog was… how do you say it? Relevant!! Finally I have found something that helped me.
Thanks a lot!
https://www.mid-day.com/brand-media/article/greenhouse-cbd-gummies-uk-and-usa-buyer-alert-do-not-buy-until-you-see-2023-23275409